Workshop sets

UNC 1/4 "- 1/2" Thread Repair Kit - Fine Whitworth - Fine UNC: 1 / 4x20, 5 / 16x18, 3 / 8x16 , 7 / 16x14, 1 / 2x13 Drills: 6,7mm, 8,3mm, 9,9mm, 11,6mm, 13mm Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie, for example, if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. (If included in the set) or pliers break the insertion part on the insert Photo is for illustrative purposes only

Thread repair kit, type UNC This workshop kit contains thread repair kits of the following dimensions in the case: UNC 1/4 "x20, UNC 5/16 "x18, UNC 3/8" x16, UNC 7/16 "x14, UNC 1/2" x13 For each size there is a set: 1x drill of the appropriate size , 1x tap, 1x insert, 1x breaker. The set of course also includes threaded inserts, in the following numbers: 1/4 ": 25x 5/16 ": 25x 3/8": 25x 7/16 ": 25x 1/2": 10x