Workshop set for repairing V-Coil UNF 1/4 - 1/2 threads
Product information
Workshop Kit for V-Coil Thread Repair UNF 1/4 "- 1/2" - Fine
Whitworth - Fine Gradient
UNF: 1 / 4x28, 5 / 16x24, 3 / 8x24 , 7 / 16x20, 1 / 2x20
Drills: 6,7mm, 8,3mm, 9,8mm, 11,5mm, 13mm
< Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, 9mm.
If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy.
Thread Repair Method:
1. Boring the damaged thread with the drill bit (if fitted)
2. Cut out the thread with a special tap (use of other - notch or machine taps does not work)
3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!)
4. (If included in the set) or pliers break the insertion part on the insert
Photo is for illustrative purposes only
UNF: 1 / 4x28, 5 / 16x24, 3 / 8x24 , 7 / 16x20, 1 / 2x20
Drills: 6,7mm, 8,3mm, 9,8mm, 11,5mm, 13mm
< Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, 9mm.
If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy.
Thread Repair Method:
1. Boring the damaged thread with the drill bit (if fitted)
2. Cut out the thread with a special tap (use of other - notch or machine taps does not work)
3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!)
4. (If included in the set) or pliers break the insertion part on the insert
Photo is for illustrative purposes only
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"vše OK"
"Dobrá cena, vše ok."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!