Woodworking

DEER SA331 125 mm Velcro Zipper Cutting Machine Fastening Method: Velcro Zirconia: zr. Z800 Extra fine cut, suitable for fine grinding also in wet conditions, also suitable for grinding / polishing of plastic, silon and the like.

DEER SA331 125 mm Velcro Zipper Cutting Machine Fastening Method: Velcro Zirconia: zr. Z1000 Extra fine cut, suitable for fine grinding also in wet conditions, also suitable for grinding / polishing of plastic, silon and the like.

Cutting disc 150 mm, DL 150 ZA / 120 Grain 120 Hole 22,2mm (classic) Application: Metal - stainless steel Zircon - corundum - green Suitable for surface preparation and finishing, rust removal, sharp edges, welding seam seaming and angular grinding Suitable for various materials: steel, stainless steel INOX, cast iron and non-ferrous materials

Short machine drill for wood with centering tip for burr-free drilling Diameter: 2,0mm Blade length: 24mm Total length: 49mm Top angle: 180° Helix: 35-40° Material: ground HSS steel Suitable for manual drilling in cordless drills and column drills. Suitable for drilling into wood, Umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows fast chip removal. Thanks to the rounded rear edge of the groove, the chips do not stick to the drilled material. Thanks to the tip geometry, the drilled hole is burr-free.

¨ Sanding Sander Shape: Rectangle 280x230 mm Grain size: zr. 280 (Image is for illustrative purposes only)

Universal glass for use on wood lathes Diameter 50mm Threaded glass is M33 are included thread reductions: 1 "(25 , 4mm) x 8 and 3/4 "(19mm) x 16 Four-jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external

Universal glass for use on wood lathe Diameter 125mm Threaded glass is M33 are included thread reductions: M33 / 1 " x8 and M33 3/4 "x16. Four jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external

Universal glass for use on wood lathes Diameter 100mm The thread of the glass is M33 are included thread reductions: 1 "(25 , 4mm) x 8 and 3/4 "(19mm) x 16 Four-jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external

Thread reduction sleeve / adapter for use with wood lathe chuck Inner thread: 1 "x 8 hours per inch Outside thread: M33x3,5 Overall length: 43mm Body diameter reduction: 39mm

Universal glass for use on a wood lathe Diameter 95mm Clamping thread on the glass is M33 threaded reducers are included: 1 " (25,4mm) x 8 and also 3/4 "(19mm) x 16 Four-jaw design The harvester is supplied no. elisti as shown - ie 2x set of internal and 2x set of external 1x clamping plate with 16 pins coated with rubber The set is supplied in an aluminum case with padding

Zircon-ceramic combined lamellar grinding wheel for grinding stainless steel and common steel Diameter: 115 mm Grain size: 40 Hole: 22,2mm(classic) Application : steel / stainless steel, possibly brass, gauge, aluminum, zinc Max. speed: 13.300 rpm Zircon - corundum - red Item interlaced(zircon / ceramics) Large grip, high life, up to 50% faster than common lamellar discs disc withstands high temperatures Suitable for surface preparation a finishing work, removing rust, sharp edges, finishing welding seams Suitable for various materials: stainless steel, steel, chrome, titanium and its alloys, non-ferrous metals

Zircon-ceramic combined lamellar grinding wheel for grinding stainless steel and common steel Diameter: 125 mm Grain size: 40 Hole: 22,2mm(classic) Application : steel / stainless steel, possibly brass, gauge, aluminum, zinc Max. speed: 12.200 rpm Zircon - corundum - red Slats are on wall Item interlaced(zircon / ceramics) Large grip, high life, up to 50% faster than common lamellar discs disc withstands high temperatures Suitable for surface preparation a finishing work, removing rust, sharp edges,, finishing welding welding and beveling grinding en Suitable for various materials: stainless steel, steel, chrome , titanium and its alloys, non-ferrous metals