Woodworking

Chisels WOOD-LINE PLUS PREMIUM in wooden box Set contains chisels width: 6/10/12/16/20/26 mm Material: Cr-V steel Hardness min. 59 HRC Thin sides for easy work in tight spaces Stained hornbeam handle, waxed

Cavity gauge with adjusting screw Shoulder length 200mm Range 12-165mm ČSN 25 1217

Hand saw blade for hand saws Length 300mm 24 teeth per inch

Classic hand saw frame Suitable for saw blades, length 300mm Frame material: metal

Abrasive fleece - abrasive fleece - scotch-brite (3M) with Velcro fastening 150mm diameter Schotch Brite SC-DH 1064296

Set of classic short wood drills with centering tip Diameters: 4 - 5 - 6 - 8 - 10 mm Material: forged blackened HSS steel, ground edge Blade arms drill precisely and without crushing. Ideal for drilling pin holes, suitable for soft and hard wood, plywood, chipboard, hard fiber laths and veneer.

Set of classic short wood drills with centering tip Diameters: 3 - 4 - 5 - 6 - 7 - 8 - 10 mm Material: forged blackened HSS steel, ground edge The arms with cutting edges drill precisely and without crushing. Ideal for drilling pin holes, suitable for soft and hard wood, plywood, chipboard, hard fiber laths and veneer.

Set of professional short wood drills with centering tip for burr-free drilling Diameters: 4 - 5 - 6 - 8 - 10 mm Top angle: 180° Helix: 35-40° Material: ground HSS steel Suitable for manual drilling in cordless drills and column drills. Suitable for drilling into wood, Umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows fast chip removal. Thanks to the rounded rear edge of the groove, the chips do not stick to the drilled material. Thanks to the tip geometry, the drilled hole is burr-free.

Set of professional short wood drills with centering tip for burr-free drilling Diameters: 3 - 4 - 5 - 6 - 7 - 8 - 10 mm Top angle: 180° Helix: 35-40° Material: ground HSS steel Suitable for manual drilling in cordless drills and column drills. Suitable for drilling into wood, Umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows fast chip removal. Thanks to the rounded rear edge of the groove, the chips do not stick to the drilled material. Thanks to the tip geometry, the drilled hole is burr-free.

Threaded adapter / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M33(M33x3, 5) Inner thread: 1 "x 8 feet per inch( = 25,4mm x 8 feet per inch) Total length: 29,5mm Reduction body diameter: 48mm This adapter is suitable for a chuck - see related products.

Threaded adapter / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M33(M33x3, 5) Inner thread: 3/4 "x 16 feet per inch( = 19.05mm x 16 feet per inch) Total length: 46mm Reduction body diameter: 48mm This adapter is suitable for a chuck - see related products.

Threaded adapter sleeve / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M40x2,0 < br> Inner Thread: 1 "x 8 feet per inch( = 25.4mm x 8 feet per inch) Overall Length: 46mm Body Diameter Reduction: 49mm This adapter is suitable for a chuck - see related products.