WNMG

VBD WNMG 080404 NF IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No .: 5507829

VBD WNMG 080408 GN NC8350 IC8350 Series: Plates with very high stiffness, with high resistance to wear. Ideal for intermittent cut or unstable engagement conditions. Usage - Universal: Steel: P20-P45 Stainless Steel: M15-M30 General conditions - see enclosed photo GN: Universal use common cutting conditions. Kat. No. 5507851

Turning insert VBD WNMG 06T308 GN IC8350 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN IC8350 series: Plates with very high rigidity, with high resistance to abrasion. Ideal for intermittent cuts or unstable engagement conditions. Application - universal: Steel: P20-P45 Stainless steel: M15-M30 Terms and conditions - see attached photo < br> Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507857 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WNMG 080408 GN NC8350 IC8350 Series: Plates with very high stiffness, with high resistance to wear. Ideal for intermittent cut or unstable engagement conditions. Usage - Universal: Steel: P20-P45 Stainless Steel: M15-M30 General conditions - see enclosed photo GN: Universal use common cutting conditions. Kat. No. 5507851

Turning insert VBD WNMA 060408 IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 Series: Hard substrate with a multilayer MTCVD TiCN coating and a thick layer of Al2O3 coating with a post-coating coating. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type without chip breaker - suitable for roughing cast iron, cast steel and hardened steels Cat. Ä. : 5508037 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

080404 GN IC5010 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN IC5010 Series: Plates have a very hard substrate (base), ideal for machining gray and ductile cast iron under stable or slightly unstable conditions - uninterrupted or slightly interrupted cut -> finishing operations. Application: Cast iron: K10-K25 Standard conditions - see attached photo GN: Universal application under normal cutting conditions. Kat. No .: 5508059

IC8250 series: < / b> Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Application: Steel: P10-P35 Stainless Steel: M05-M20 WG Type: Suitable for machining with large with a very smooth surface. Ref. : 5508233

IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 5509504

VBD WNMG 060404 WG - Wiper IC8150 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: < / b> Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 General conditions - see attached photo WG Type: Suitable for machining with large with a very smooth surface. Ref. : 5550530

VBD WNMG 080408 NR IC5010 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN IC5010 Series: Plates have a very hard substrate (base), ideal for machining gray and ductile cast iron under stable or slightly unstable conditions - unbroken or slightly interrupted cut -> finishing operations. Application - roughing: Cast iron: K10-K25 Standard conditions - see attached photo Typ NR: Special grinder for roughing. Kat. No .: 5550537

Blade DNMG 150408 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 5568614

Turning insert VBD WNMG 060408 PP IC907 Radius 0.8mm Coating: PVD, TiAlN TiN Series IC907: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat resistant steel, stainless steel, aluminum alloy and mild low carbon steel. Cat. no.: 5506167 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.