With exchangable insert
-
Replaceable insert 16 IL 20 W BMA, Carmex
Interchangeable insert TN 16IL20W Size : 16 Number of strokes per inch : 20 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Replaceable insert 16 IL 22 W BMA, Carmex
Interchangeable insert insert TN 16IL22W Size : 16 Number of strokes per inch : 22 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Interchangeable insert 16 IL 24 W BMA, Carmex
Interchangeable insert TN 16IL24W Size : 16 Number of strokes per inch : 24 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock12,20 € with VAT -
Interchangeable insert 16 IL 26 W BMA, Carmex
Interchangeable insert TN 16IL26W Size : 16 Number of strokes per inch : 26 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Interchangeable insert 16 IL 28 W BMA, Carmex
Interchangeable insert TN 16IL28W Size : 16 Number of strokes per inch : 28 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting internal inch pipe thread G Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Interchangeable insert 16 IL 32 W BMA, Carmex
Interchangeable insert TN 16IL32W Size : 16 Number of strokes per inch : 32 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Replaceable insert 16 IL 36 W BMA, Carmex
Interchangeable insert TN 16IL36W Size : 16 Number of strokes per inch : 36 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Replaceable insert 16 IL 40 W BMA, Carmex
Interchangeable insert TN 16IL40W Size : 16 Number of strokes per inch : 40 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Replaceable insert 16 IL 48 W BMA, Carmex
Interchangeable insert TN 16IL48W Size : 16 Number of strokes per inch : 48 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Interchangeable insert 16 IL 56 W BMA, Carmex
Interchangeable insert TN 16IL56W Size : 16 Number of strokes per inch : 56 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Replaceable insert 16 IL 60 W BMA, Carmex
Interchangeable insert TN 16IL60W Size : 16 Number of strokes per inch : 60 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT -
Interchangeable insert 16 IL 72 W BMA, Carmex
Interchangeable insert TN 16IL72W Size : 16 Number of strokes per inch : 72 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request12,20 € with VAT
