With exchangable insert

Product count: 274
  • Interchangeable insert 06 IR M ISO BMA, Carmex

    Interchangeable insert 06 IR M ISO BMA, Carmex

    Interchangeable blade thread insert 06 IR M ISO BMA Size: 06 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Suitable for cutting internal metric threads Can also be used to cut external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    On request
    Price - On request
  • Interchangeable insert 06 IL M ISO BMA, Carmex

    Interchangeable insert 06 IL M ISO BMA, Carmex

    Interchangeable blade thread insert 06 IL M ISO BMA Size: 06 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Suitable for cutting internal metric threads Can also be used to cut external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    9,14 € with VAT
  • Interchangeable insert 08 IR M ISO BMA, Carmex

    Interchangeable insert 08 IR M ISO BMA, Carmex

    Interchangeable blade thread insert 08 IR M ISO BMA Size: 08 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Suitable for cutting internal metric threads Can also be used to cut external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    from 14,60 € with VAT
  • Interchangeable insert 08 IL M ISO BMA, Carmex

    Interchangeable insert 08 IL M ISO BMA, Carmex

    Interchangeable blade thread insert 08 IL M ISO BMA Size: 08 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Suitable for cutting internal metric threads Can also be used to cut external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    5,92 € with VAT
  • Replaceable insert 11 ER M ISO BMA, Carmex

    Replaceable insert 11 ER M ISO BMA, Carmex

    External replaceable blade thread insert 11 ER M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    12,15 € with VAT
  • Interchangeable insert 11 IR M ISO BMA, Carmex

    Interchangeable insert 11 IR M ISO BMA, Carmex

    Internal replaceable cutting insert 11 IR M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge): 3.2mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    12,15 € with VAT
  • Interchangeable insert 11 IL M ISO BMA , Carmex

    Interchangeable insert 11 IL M ISO BMA , Carmex

    Internal replaceable blade thread insert 11 IL M ISO BMA Size: 11 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge): 3.2mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    12,15 € with VAT
  • Interchangeable insert 11 ER W BMA , Carmex

    Interchangeable insert 11 ER W BMA , Carmex

    External replaceable blade thread insert 11 ER W Size: 11 Number of strokes per inch: according to the selected variant Full profile / partial profile: depending on the selected variant Apex angle: 55° Design of the plate: right Height (to edge): 3.2mm Suitable for cutting an external inch whitworth thread W (category BSW,BSF,BSP,BSB) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    On request
    Price - On request
  • Interchangeable insert 11 EL W BMA , Carmex

    Interchangeable insert 11 EL W BMA , Carmex

    External replaceable blade thread insert 11 EL W Size: 11 Number of strokes per inch: according to the selected variant Full profile / partial profile: depending on the selected variant Apex angle: 55° Design of the plate: left Height (to edge): 3.2mm Suitable for cutting an external inch whitworth thread W (category BSW,BSF,BSP,BSB) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    38,76 € with VAT
  • Interchangeable insert 11 IR W BMA , Carmex

    Interchangeable insert 11 IR W BMA , Carmex

    Internal replaceable cutting edge thread insert 11 IR W Size: 11 Number of strokes per inch: according to the selected variant Full profile / partial profile: depending on the selected variant Apex angle: 55° Design of the plate: right Height (to edge): 3.2mm Suitable for cutting internal inch whitworth thread W (category BSW,BSF,BSP,BSB) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    On request
    Price - On request
  • Interchangeable insert 16 ER M ISO BMA, Carmex

    Interchangeable insert 16 ER M ISO BMA, Carmex

    External replaceable blade thread insert 16 ER M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    12,15 € with VAT
  • Interchangeable insert 16 EL M ISO BMA, Carmex

    Interchangeable insert 16 EL M ISO BMA, Carmex

    External replaceable blade thread insert 16 EL M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

    from 3,34 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

With exchangable insert