Welding

Max. pliers opening: 100 mm Maximum clamping from material edge: mm Clamped jaws inside diameter mm - Information for clamping profile beams Overall length: 460mm

Nonius DBP Scale Gauge with Three Scales - including Calibration Sheet Gauge Gauge Contains magnifying glass for easier reading of measured values. Three scales for measuring welding properties. Material: INOX / stainless steel

Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle Measurement for measuring fillet welds, 3 scales Includes a magnifying glass for easier reading of measured values values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.

Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle - including calibration sheet Measurement for measuring fillet welds, 3 scales Includes magnifying glass for easier reading of measured values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.

Digital Digitometer with Magnet / Magnets 0-360 ° Always displayed angle 0-90 ° Dimensions of the slope: 52x52x26mm Relative measurement function (button 0 %) * HOLD function (keeps the measured value) * Calibrate function for recalibrating the inclinometer on a flat (0 °)

Welding gauge, for gap between sheets, between welded surfaces, for hole diameters Range: 1-15 mm Cutting: 0,1mm Gauge total length: 145mm Material: stainless steel / INOX On the other hand is an inch scale

Convex and concave welding gauge This gauge set includes dipsticks from 3.0mm to 25mm All dimensions are embossed on the gauge sheets. Material: stainless steel

Gauge for convex and concave welds Material: Stainless steel Can be measured in millimeters and inches This set contains gauges from 3,2mm to 25,4mm, in inches 1/8 "- 1 " All dimensions are embossed on the dies.

INOX

3-12 mm thickness of welding, 5 - 6 - 6,5 - 7 - 8 - 10 - 12 Total 12 templates. Material: stainless steel / INOX

Face gauge gauge Double sided scale in the range 0-15 Gauge size 65x33mm

Welding gauge, welding gauge, welding grip, gauge welding gauge, gauge seam gauge, caliper Material INOX Measuring range 0-20mm Scaling: 0,1mm Angles: 60 °, 70 °, 80 °, 90 ° Screw locking. Standard: ČSN 253921 Flattened welds are read on the scale / side with the locking screw, in the cut welds are read on the scale / side without the locking screw.