VOLKEL

New double-sided threaded calibration mandrel / limit threaded mandrel - ISO for metric thread Size: according to the selected variant Tolerance: 6H Good + junk Standard: ČSN 254020 / CSN 25 4020 / DIN ISO 1502 / DIN 13

Závitový bit do AKU vŕtačky so šesťhrannou stopkou 1/4" Lícovanie: ISO2 Materiál: HSS - Rýchlorezná oceľ Norma : DIN13 Rozmery - viď priložený katalógový list Použitie: Rezanie závitu v AKU vŕtačke, vhodné tiež pre rýchlu opravu (pretiahnutie) závitov

Threaded dies with jaws / threaded jaws Metric thread Tolerance: 6g (normal tolerance) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: DIN 223 / DIN EN 22 568; replacement of ČSN 22 3210 / CSN 223210

Hand tap W Thread type: English inch whitworth thread Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 352, BS 84 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Climb: basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Pitch : basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch : soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch: soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

BSF hand tap Thread type: British Standard whitworth Fine Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 900MPa)

Left short machine tap, straight slot, for conical tubular thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Hand tap Pz / Pg Thread type: armored thread Pitch: basic Material: HSS - High speed steel Standard: DIN 40432 HSS taps are suitable for tapping common steels (up to 800MPa)

Short machine tap, straight slot, for conical tubular thread with chip breaker Thread type: NPTF - American conical pipe thread (National Pipe Taper Fuel), mechanically-sealing pipe thread Conicity: 1:16 Top angle: 60 ° Form: B Material: HSSE - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes