Vices, dividers and tables

Home washers milling (milling washer) pads in a vice, milling pads Home Kit 24 pairs 150mm dimensions of the individual pads: Home 8 x (11, 16, 21, 26, 31 , 36mm) 10 x (13, 18, 23, 28, 33, 38mm) 12 x (15, 20, 25, 30, 35, 40mm) , 32, 37, 42mm) Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 150 mm Home washers Dimensions: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x26, 8x28, 8x30, 8x32, 8x35, 8x40, 8x45, 8x50 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling washers ( milling washer ) , vise washers , milling washers Set of 18 pairs of 150mm length Dimensions of washers: 8x17, 8x19, 8x21, 8x23, 8x25, 8x27, 8x29, 8x31, 8x33, 8x35, 8x37, 8x39, 8x41, 8x43, 8x45, 8x47, 8x49, 8x51 mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 55 HRC

10, 10x30, 10x32 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling washers ( milling washer ) , vise washers , milling washers Set of 9 pairs, length 160mm Dimensions of washers: 3x10; 3x14; 3x18; 3x22; 3x26; 3x30; 3x34; 3x38; 3x42mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 45-50 HRC

Milling Washers, Vices, Milling Washers Set of 9 Pairs 160mm Length Washer Size: 4x10; 4x14; 4x18; 4x22; 4x26; 4x30; 4x34; 4x38; 4x42mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling washers ( milling washer ) , vise washers , milling washers Set of 9 pairs, length 160mm Dimensions of washers: 5x10; 5x14; 5x18; 5x22; 5x26; 5x30; 5x34; 5x38; 5x42mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 45-50 HRC

Milling Washers, Vices, Milling Washers Set of 8 Pairs 160mm Length Washer Size: 8x12; 8x17; 8x22; 8x25; 8x28; 8x32; 8x36; 8x38mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Three-piece chuck with diameter 80mm Max. run at point B: 0.03mm Max. running at point A: 0,05mm Coaxiality: up to 0,03mm (see photo) The divider has two stones used to adjust the stop - see photo.

< 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm; 19-20mm Note: Collets 2mm and 3mm can be purchased - see related products Splitting after 0.01 ° Automatic arresting after 15 ° Max. runout at point B: 0.02mm Max. running at point A: 0,015mm Coaxiality: up to 0,02mm (see photo) The divider has two stones to adjust the stop - see photo. Axle Height 80mm Base Size: 106x83mm Clamping Hole: 2x 9mm Diameter Clamping Holes 88mm Overall Height 132mm Overall Length Without Handle: 150mm Overall Length handle: 155mm 15 ° Adjustable stops all around: holder 90mm Nut nut diameter 50mm Supplied in wooden case. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture.

A set of basic jaws for a 125mm modular vice The jaws fit these Vertex vices: VMP-5 - For the compatibility of the jaws with vices of other brands we do not guarantee.

A set of basic jaws for a 150mm modular vice The jaws fit these Vertex vices: VMP-6, VMP-6B and VMP-6C - For the compatibility of the jaws with vices of other brands we do not guarantee.