Vices, dividers and tables

Milling Washers, Vices, Milling Washers Pads: 5mm (3/16 "- 4,7625 mm) Washer Length: 150mm Set of 4 pairs: Washer dimensions: 5x25; 5x31; 5x38; 5x44 mm Transmission: 0,01mm Plane surface: 0,005mm (see attached picture ) Hardness: 48-53 HRC Order No.: 1004-050

Milling Washers, Vices, Milling Washers Pads Height: 6mm (1/4 "- 6,35 mm) Washer Length: 150mm Set of 9 pairs: Washer dimensions: 6x19; 6x22; 6x25; 6x28; 6x31; 6x35; 6x38; 6x41; 6x44 mm Accuracy: 0,01mm Flatness: 0.005mm (see attached picture) Hardness: 48-53 HRC Order No.: 1004-040

Frézařské podložky ( frézařská podložka ) , podložky do svěráku , frézovací podložkyVýška podložek : 13mm (1/2" - 12,7 mm)Délka podložek : 150mmSada obsahuje 4 páry : Rozměry podložek : 13x25 ; 13x31 ; 13x38 ; 13x44 mmPřenost : 0,01mmRovinnost funkčních ploch : 0,005mm (viz přiložený obrázek)Tvrdost : 48-53 HRCObj. č. : 1004-070

Cross table under milling machine Table area: 180x100mm Feeds 50 and 80mm T-slot: 3/8 "(9,525mm) Total Â!Height: 100mm One turn of the scale moves the table by 2.5mm - horizontally(and vertically). Dividing 0.02mm(1 length scale = 0,02mm) Max load: 35kg Accuracy: 0,02 / 100mm Order no .: 1007-001

Cross table under milling machine Table area: 200x500mm Slides 200 and 250mm T-slot: 3/8 "(9,525mm) Total Â!Height: 155mm One turn of the scale moves the table by 4mm - horizontally(and vertically). Dividing 0.02mm(1 length of scale = 0,02mm) Max load: 140kg Accuracy: 0,02 / 100mm Order no .: 1007-003

Cross table under milling machine Table area: 250x600mm Feeds 250 and 300mm T groove: 1/2 "(12,7mm) Overall height: 210mm With one turn of the scale, the table moves by 4mm - horizontally(and vertically). Dividing 0.02mm(1 length scale = 0,02mm) Max load: 175kg Accuracy: 0.02 / 100mm Order no .: 1007-004

Cross Milling Table Area 310x140mm 180 and 130mm Slides 2x T Groove 16mm Overall Height 120mm Base 220mm Diameter With Clamping Mesh for M14 One Turning Scale the table moves 2mm horizontally (even vertically). Cutting 0,02mm (1 graduation scale = 0,02mm) Ref. No. 1007-020

Splitter chuck with universal chuck Chuck chuck with diameter 80mm Clamping range: 2 - 70mm Splitting after 15 ° with accuracy of 0.01 ° (10'' seconds), possibly in 80mm (tolerance - 1mm) Universal hole: 16mm Other dimensions - see attached photo - No. V-PS-SP

Sinus tilting table for VERTEX dividers Tilt range: 0-45 ° Dimensions - see enclosed photo Calculation for height of control gauge: H = 50 * sin and Maintenance: corrosion-free oil that is suitable for long-term storage

Tilting divider with universal chisel Chuck diameter: 100mm Supplied inside and out jaw jaws Clamping range: For outer diameter: 3-90mm For inner diameter: 32- 84mm Base size: 180x110mm Total height: 181mm The chuck is rotatable 360 ??â € ‹â €‹  °

High-precision grinding machine with tilting machine control sin prism with prism and guide screw Jaw width: 73 mm Jaw height: 30mm Max. Jaw opening: 80mm Overall height of the vice: 93mm Overall length of the vice: 160mm (without screw) Angle: 0 ° -46 ° Flatness: 0.003 / 100mm - surfaces: 0.005 / 100mm Hardened and Cut Jaws, HRC 60 Vibrating Material: Tool Steel SKS3, ie C = 0.09 - 1.0%, Si = 0.10 - 0.35%, Mn = 0.90 - 1.20%, P = 0.03%, S = 0.03%, Cr = 0.50 - 1.00%, W = 0.050 - 1.00% Usage: Horizontal For grinding and inspection, serial and piece production on NC milling machines and machining centers

15', , 1 °, 2 °, 3 °, 4 °, 5 °, 10 °, 15 °, 20 °, 25 °, 30 ° Accuracy: 0.003mm Hardness: 48-53 HRC < br> No .: 2006-001