Vertex

Drill chuck for cone chuck B16 Diameter of chuck part is 24mm. Taper Cone: R8 Internal Thread: 7/16 "-20 UNF Overall Length: 134mm Cone Length B16: 24mm Cylinder Stopper with 73mm Groove < br> Suitable for American BridgePort machines

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 18mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm Also in the Z axis , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Edge Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of Clamping Part: 32mm Body Diameter 18mm Diameter of Ball: 10mm Overall Length: 157mm Clamping Length: 74mm Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signaling. It lights up once the metal ball touches the workpiece The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 16mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm The Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive goes unsteady! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signaling. It lights up once the metal ball touches the workpiece The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 32mm Diameter of the body 16mm Diameter of the ball: 10mm Overall length: 157mm Clamping length: 74mm The Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive goes unsteady! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Probe / Sensor for X and Y Axes High Sensitivity Position Sensor Accuracy 0.003mm Speed: 600-1000 rpm. Diameter of Clamping Part: 10mm Body Diameter 10mm Body Diameter 5mm Overall Length: 78mm Clamping Length: 26mm

Drill stand - drill bit and cutter blades For drill bits 1,0 - 13,0mm, total per 100 drill bit Blade is made of harder plastic. Holder Diameter: 174mm, Height 90mm Holes: 1.0 - 10.0mm x 0.1mm 10.5; 10.9; 11.0; 11.5; 11.9; 12.0; 12.5; 12.9; 13.0

90-140 ° Angle Grinders, the compact grinder can quickly and precisely trim the drills with the top corner angles of 90 - 140th. According to the diameter of the drill, you select the correct collet, insert it in the holder and insert the drill bit ER20 collector set is part of the grinder: 3/4/5/6/7/8/9/10/11/12 / 13mm Usage: The grinding machine is suitable for grinding of right-handed spiral drills with cylindrical and taper shanks. Grinding wheel CBN

12-25mm > This compact grinder can quickly and accurately drill bits with cutting edge angles of 100 - 136th. According to the diameter of the drill, you select the correct collet, insert it in the holder and insert the drill bit ER40 collet set is part of the grinder: 12/13/14/15/16/17/18/19/20/21/22/23 / 24 / 25mm Application: The grinding machine is suitable for grinding of right-handed spiral drills with cylindrical and conical shanks. Grinding wheel CBN

Grinding machine / sharpener with diamond wheels Application range: 4-13mm This compact grinder can grind double-edged quickly and accurately, three cutters and four cutters. Depending on the diameter and number of cutters, select the correct collet, insert it in the correct adapter and insert the cutter. Package contains: 1x set of ER20 collets: 4/5/6/7/8/9/10/11/12 / 13mm 1x grinding wheel VEG-13DS SDC 300(for carbide cutters dia. 4.0 - 6.0mm) 1x grinding wheel VEG-13DL SDC 270(for carbide cutters dia. 7.0 - 13.0mm) 1x adapter for 2bA… â „c. cutters 1x adapter for 3bA… â „c. cutters 1x adapter for 4bA… â „c. cutters 1x Allen key 1x cable with a length of 1.5 mm 230V Usage: The grinder is suitable for right-handed grinding ivAfÂ1ch milling machine. SDC grinding wheels are suitable for grinding carbide milling cutters For grinding HSS milling cutters it is necessary to buy CBN discs VEG-13BS and VEG-13BL. Additional grinding CBN and diamond SDC wheels can be purchased for the grinder. Ord. A „. : 8001-510A

Grinder / Sharpening Cutter Range: 4-13mm This compact grinder can quickly and precisely sharpen two-sided, three-sided and four-sided milling cutters. According to the diameter and number of cutter blades, you select the correct collet, insert it into the correct adapter and insert the cutter. Package includes: 1x ER20: 4/5/6/7/8/9/10/11/12 / 13mm collet 1x VEG-13BS CBN 300 grinding wheel (for HSS 4,0 - 6,0 mm cutters) 1x VEG-13BL CBN 270 grinding wheel (for HSS cutters 7,0 - 13,0mm) 1x adapter for 2 pcs. milling cutters 1x adapter for 3pcs. milling cutters 1x adapter for 4pcs. Milling Cutters 1x Allen key 4mm 1x 1.5mm long cable 230V Application: The grinding machine is suitable for grinding of right-handed milling cutters. CBN grinding wheels are suitable for grinding HSS cutters For grinding of hard metal cutters you need to buy diamond wheels VEG-13DS and VEG-13DL. Additional abrasive CBN and diamond blades can be purchased for the grinder. Ref. No. 8001-012