VBD for drills

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Steel with strength up to 1365 MPa Stainless steel with strength above 900 MPa Cast iron up to 400HBW strength Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. No. : 22 2010

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3010

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 144° Material: sintered powder steel 15 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3510

Carbide replaceable insert for Karnasch drill - see related products For drilling the diameter: according to the selected variant Apex angle: 132° Material: carbide 20/30 with Steel-Tec coating Usage : Steel with strength up to 1400 MPa Stainless steel with strength above 900 MPa Gray cast iron Hardox, Hastelly, Inconel, Nimonic and similar materials Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4010

Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Steel-Tec Usage : All types of cast iron Refractory alloys and special stainless steels Hastelloy, Inconel, titanium alloys Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4510

Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Alu-Tec Usage : Aluminum, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 5010

Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Dia-Tec Usage : Plexiglass, carbon materials (GFK, CFK), graphite, etc. Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 5510

VBD XCMT 10T308 Turning Pliers - MF IC908, suitable for AEKL and AEKR holders Radius 0.8mm Coating: PVD, TiAlN Series IC908: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Machining of Openings and External Turning Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Superslitz: S05-S20 Hardwoods: H05-H15 MF: Two cutting edges suitable for hard materials and intermittent cut. Low cutting forces due to high edges and positive plate angles. Ref. No .: 5508048

Drilling insert VBD SPMT 050204 - DG PKM30 Radius: 0,4mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Drilling insert VBD SPMT 060204 - DG PKM30 Radius: 0,4mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Drilling insert VBD SPMT 07T308 - DG PKM30 Radius: 0,8mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Drilling insert VBD SPMT 090408 - DG PKM30 Radius: 0,8mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.