Vakuové upínače

Very strong pressure, suitable for machining plastic, glass, copper, wood, stainless steel, aluminum and other non-ferrous / non-magnetic metals Size: according to the selected variant Work surface: see product description for individual variants Minimum workpiece size: 60x60mm Quick clamping - within 4-6 seconds, after clamping the vacuum holds even in case of compressor failure. Suitable for CNC plotters / CNC milling machines and grinders. Clamping force: 220-1000N / mm2 - depending on the quality of the clamped surface. Working pressure: 3-8bar (ideally 3.5bar) Vacuum generation using an integrated venturi tube (part of the board) Material: Aluminum alloy Instructions for use: 1) Thread a rubber seal around the surface into which the workpiece will be inserted. 2) Insert the workpiece into the area bounded by the seal 3) Connect the compressor to one of the two inputs (one is always blinded). 4) Press the button on the board to start the down pressure. Advantages : High clamping force Universal use Using the sealing cord, small irregularities on the surface of the workpiece can be defined. Vacuum plates can be interconnected and combined Negligible pressure consumption - cost reduction The package also includes: clamps, spare rubber seal

Uses to correctly create a negative pressure between the clamping plate and the workpiece. Length: 1m This sealing cord can also be used to define small irregularities on the surface of the workpiece.