Universal self-centering chuck TOS IUS 100 / 3-1 M1, ČSN 243801
IUS 80/3-1 (type Superior) |
In stock
(4x)
|
250,94 € with VAT |
IUS 80/3-2 (type Standard) |
In stock
(1x)
|
208,14 € with VAT |
IUS 100/3-1 (type Superior) |
In stock
(2x)
|
278,24 € with VAT |
IUS 100/3-2 (type Standard) |
In stock
(5x)
|
225,21 € with VAT |
IUS 125/3-1 (type Superior) |
In stock
(4x)
|
303,99 € with VAT |
IUS 125/3-2 (type Standard) |
In stock
(5x)
|
244,75 € with VAT |
IUS 160/3-1 (type Superior) |
In stock
(2x)
|
378,75 € with VAT |
IUS 160/3-2 (type Standard) |
In stock
(9x)
|
305,54 € with VAT |
IUS 200/3-1 (type Superior) |
In stock
(3x)
|
474,60 € with VAT |
IUS 200/3-2 (type Standard) |
In stock
(8x)
|
415,04 € with VAT |
IUS 250/3-1 (type Superior) |
In stock
(2x)
|
673,44 € with VAT |
IUS 250/3-2 (type Standard) |
In stock
(4x)
|
605,19 € with VAT |
IUS 315/3-1 (type Superior) |
In stock
(1x)
|
1.164,78 € with VAT |
IUS 315/3-2 (type Standard) |
In stock
(1x)
|
978,97 € with VAT |
IUS 400/3-1 (type Superior) |
On request
|
1.568,34 € with VAT |
IUS 400/3-2 (type Standard) |
In stock
(1x)
|
1.407,35 € with VAT |
IUS 500/3-1 (type Superior) |
On request
|
6.671,81 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000125795
- Brand:
- TOS Svitavy
- Warranty:
- 24 months
- Code:
- 2438010103110
Product information
Three-chuck chuck, supplied in original box with set of inner and outer jaws and loop.
Precision "1" - Precision universal, upper class, suitable for grinder
ČSN 243801 / CSN 24 3801
Diameter: 100
Clamping range E3 - 39 mm < Clamping range F3 - 45 mm
Clamping range G24 - 60 mm
Clamping range H58 - 94 mm
Clamping range J25 - 67 mm
Clamping range L3 - 39 mm
Clamping range N30 - 66 mm
Clamping range O64 - 100 mm
Clamping range P42 - 72 mm
Clamping range R77 - 107 mm
Clamping range S max.122 mm
Clamping range Tmax 130 mm
Clamping type M1
Accuracy class increased accuracy SUPERIOR
Number of jaws 3
E H7 80 mm
F ± 0,2 90 mm
G 3xM6 mm
H 41,5 mm
J 17 mm
K 8 mm
L 85 mm
N 58.4 mm
O 18 mm
R 23 mm
S 3 mm
T 52 mm
U 46 mm
Variants
Accessories
-
Hard inner jaw SCN 100/3 - 1 for universal self-centering chuck TOS
New Unused Set of Internal Jaws for Universal 100mm 3-Piece Universal, for 1-Up 2 - Lathe precision (standard) ČSN 243850/24 3850 These jaws are referred to as "opposite". They are suitable for workpiece clamping for outdoor diameter, but according to the manufacturer's catalog are called internal! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock103,60 € with VAT -
Basic jaw SM 100/3 ČSN 243855 TOS
Basic jaws / lower ridges for TOS universal chuck chuck Size: 100 mm Number of jaws in set: 3 pcs ČSN 24 3855 Cat. number: 243855.103000 These spare jaws fit ONLY in the TOS Svitavy chucks. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock81,89 € with VAT -
Hard outer jaw SCV 100/3 - 1 for self-centering universal chuck TOS
2 - Lathe precision (standard) ČSN 243849/24 3849 These jaws are referred to as "classical" lathes. They are suitable for clamping the workpiece for the inner diameter, but according to the manufacturer's catalog are referred to as external! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock103,60 € with VAT -
Monoblock jaw MC 100/3 ČSN 243834, TOS
Soft Jaw / Soft Jaws Set of Monoblock Soft Jaws MC Universal Chuck 100mm, Three Jaws ČSN 243834 These spare jaws fit ONLY to chucks TOS Svitavy. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock45,91 € with VAT -
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / vaseline - Lubex PAST NBI2 WHITE without the content of abrasive powdered metals with the content of PTFE / Teflon for clean assembly work. Quantity: 450g (in a can) Color: white/beige, glossy Base oil: synthetics Thickener: Calcium-sulfonate complex Working temperature: -30°C to 150°C High adhesion to the lubricated surface, very high resistance to washing out with water or cooling liquid. Suitable for lubrication of lathe, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Benefits of use : * Suitable as a paste for assembly work * Also suitable for non-ferrous metals * Prevents wear, contact and tribo corrosion * Excellent anti-friction and EP properties and high white solid grease content * Resistance to water, cooling and cutting fluids, alkalis and chemicals * Prevents corrosion at the material interface and wear corrosion in exposed cases *Thanks to the polymers it contains, the paste has exceptional toughness and resistance to washing out. This is a replacement for Mogul Calsul 2 WR (for lubrication of universal lathe chucks)
In stock39,65 € with VAT
Alternatives
-
Universal self-centering chuck KUS 100/3 M1, Kovonastroje
Dimensions & Parameters - See enclosed PDF Accuracy, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock97,31 € with VAT -
Universal self-centering chuck ITEM 100/3 M1 HardLine, Kovonastroje
HardLine has locally grooved guide grooves for pinion mounting Diameter: 100 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock120,20 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!