Universal chuck 100 mm for wood lathe with thread M40x2.0

Threaded adapter sleeve / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M40x2,0 < br> Female thread: M33(M33x3,5) Overall length: 35mm Body diameter reduction: 49mm This adapter is suitable for the chuck - see related products.

Threaded adapter sleeve / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M40x2,0 < br> Inner Thread: 1 "x 8 feet per inch( = 25.4mm x 8 feet per inch) Overall Length: 46mm Body Diameter Reduction: 49mm This adapter is suitable for a chuck - see related products.

Threaded adapter sleeve / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M40x2,0 < br> Inner thread: 3/4 "x 16 feet per inch( = 19.05mm x 16 feet per inch) Total length: 30mm Diameter r reduction body: 49mm This adapter is suitable for a chuck - see related products.

Set of 4 jaws for chuck - see related products Clamping range: Behind the inner edge of the jaws: 85-120mm Behind the outer edge of the jaws: 100-135mm Inner height of the jaws for clamping the workpiece: 11mm Material: steel

Set of 4 jaws for chuck - see related products Clamping range: Inside: 7-44mm, depth 42mm Outside: 36-73mm, depth 35mm ( when clamping at the heel up to 85mm) Material: steel

Set of 4 jaws for chuck - see related products Clamp range: Inside: 7-44mm, depth 32mm Outside: 26-62mm, depth 25mm When clamping the log by the inner edge of the jaws, it is necessary to insert the material at least to the full depth of the jaws and tighten with sensitivity - each jaw holds only one screw. Material: steel

Jaws / face plate with chuck threads - see related products Clamping range: Inside: 58-250mm Outside: 94-290mm Height of pins: 12mm Max. revolutions: 600 rpm. Material: aluminum alloy Suitable for the production of plates, bowls or the processing of larger workpieces.

Special synthetic white assembly lubricating paste / grease / vaseline - Lubex PAST NBI2 WHITE without the content of abrasive powdered metals with the content of PTFE / Teflon for clean assembly work. Quantity: 450g (in a can) Color: white/beige, glossy Base oil: synthetics Thickener: Calcium-sulfonate complex Working temperature: -30°C to 150°C High adhesion to the lubricated surface, very high resistance to washing out with water or cooling liquid. Suitable for lubrication of lathe, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Benefits of use : * Suitable as a paste for assembly work * Also suitable for non-ferrous metals * Prevents wear, contact and tribo corrosion * Excellent anti-friction and EP properties and high white solid grease content * Resistance to water, cooling and cutting fluids, alkalis and chemicals * Prevents corrosion at the material interface and wear corrosion in exposed cases *Thanks to the polymers it contains, the paste has exceptional toughness and resistance to washing out. This is a replacement for Mogul Calsul 2 WR (for lubrication of universal lathe chucks)