Univ. chucks 3 Art.

Three-jaw lathe scroll chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M1 (from the back of the chuck) * The HardLine design has hardened guide grooves of the jaws, the chuck has a longer service life, the grooves do not squeeze out. Additional dimensions and parameters - see the attached PDF Accuracy, accuracy - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M3 (screws from the front only), or M2 (screws from the front and from the back) Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Including a set of Allen screws for clamping from the front only (type M3). Suitable for grinders, dividers, rotary tables, etc.

Three-jaw lathe chuck / universal chuck with set of soft split SD jaws + hard outer OJS and hard inner IJS jaws and handle Diameter: according to the selected variant Clamping: M1 Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. To the soft split jaws, it is possible to purchase a locking ring for precise adjustment of the outer and inner contact surfaces of the soft jaws - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle, with a short taper type D - camlock pins - ČSN 243830 / DIN55029 Diameter: according to the selected variant Clamping Camlock - size: according to the selected variant Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Suitable e.g. for lathes with camlock DIN ISO 702-2

Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243801 Clamping: M1 (from the back of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243809 / DIN 6350 Clamping: M2 (from the front side of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

Small Three Jaw Lathe Chuck / Pinionless Universal with Hard Reverse Jaws Diameter: according to the selected variant Clamping: M3 or behind the thread - see product description for individual variants Additional dimensions and parameters - see the attached PDF Steel body We recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. Usage: - for machining wood, plastics and similar soft materials - for grinding spiral drills and other cutting tools