Turning knife TDNNN 2020 K15, AKKO
| 16x16mm / DNMG 1104 |
On request
|
83,24 € with VAT |
| 20x20mm / DNMG 1104 |
On request
|
85,72 € with VAT |
| 20x20mm / DNMG 1506 |
On request
|
85,72 € with VAT |
| 25x25mm / DNMG 1104 |
On request
|
86,96 € with VAT |
| 25x25mm / DNMG 1506 |
On request
|
86,96 € with VAT |
| 32x32mm / DNMG 1506 |
On request
|
98,14 € with VAT |
| 40x40mm / DNMG 1506 |
On request
|
162,73 € with VAT |
| 50x50mm / DNMG 1506 |
On request
|
229,82 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000423464
- Brand:
- AKKO
- Warranty:
- 24 months
- Code:
- A-TDNNN-2020-K15
Product information
Height after running plates: 20mm
Total length of the knife : 125mm
Interchangeable plates are marked DNM. 1506 ..(ie DNMG, DNMM, etc.)
A key for exchanging the slice is also supplied with the goods.
This is an alternative to the PDNNN or DDNNN / MDNNN knife
Variants
Accessories
-
Replaceable insert DNMG 150608-TF IC8250, Iscar
DNMG 150608 TF IC8250 Radi 0.8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Application: Steel: P10-P35 Stainless Steel: M05-M20 TF Type: Universal use in conventional cutting conditions. Kat. No .: 5508111
In stock16,17 € with VAT -
Replaceable insert DNMG 150612-M3P IC8250, Iscar
DNMG 150612 - M3P IC8250 IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567489
In stock15,66 € with VAT -
Replaceable insert DNMG 150608-M3P IC8250, Iscar
DNMG 150608 - M3P IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No. 5567488
In stock15,66 € with VAT -
Replaceable insert DNMG 150604-NF IC8250, Iscar
DNMG 150604 NF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No. 5550328
In stock16,17 € with VAT -
Replaceable insert DNMG 150608-GN IC830, Iscar
Blade DNMG 150608 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308095
In stock14,54 € with VAT -
Interchangeable insert DNMG 150604E-FM; T9325, PRAMET
Universal double-sided lathe insert, exchangeable insert, insert DNMG 150604 E-FM T9325 Radius: 0,4mm Height plate: 6,35mm Sheet material: T9325 Application: Steel: P15-P35 < br> Stainless steel: M10-M25 Cast iron: K20-K35 Superalloys: S20-S30 800160017 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.
In stock17,55 € with VAT -
Interchangeable insert DNMG 150604E-M; 6630, PRAMET
Universal double-sided lathe insert, replaceable insert, insert DNMG 150604 EM 6630 Radius: 0,4mm Insert height ka: 6,35mm Sheet material: 6630 Application: Medium - common Steel: P15 -P35 Stainless steel: M10-M30 Cast iron: K20-K30 Superalloys: S15-S25 Ord. Ä. : 80004115 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock18,16 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!