Turning knife left-sided DIN 4980 L / CSN 223717 , DENAS
Variant:
| 10x10 P10 - for steel |
On request
|
5,69 € with VAT |
| 10x10 P20 - for steel |
On request
|
5,69 € with VAT |
| 10x10 P30 - for steel |
On request
|
5,69 € with VAT |
| 10x10 P45 - for steel |
On request
|
5,69 € with VAT |
| 10x10 K10 - for cast iron |
On request
|
5,69 € with VAT |
| 10x10 U10 - for INOX |
On request
|
5,69 € with VAT |
| 10x10 U30 - for INOX |
On request
|
5,69 € with VAT |
| 12x12 P10 - for steel |
On request
|
6,74 € with VAT |
| 12x12 P20 - for steel |
On request
|
6,74 € with VAT |
| 12x12 P30 - for steel |
On request
|
6,74 € with VAT |
| 12x12 P45 - for steel |
On request
|
6,74 € with VAT |
| 12x12 K10 - for cast iron |
In stock
(3x)
|
6,74 € with VAT |
| 12x12 U10 - for INOX |
On request
|
6,74 € with VAT |
| 12x12 U30 - for INOX |
On request
|
6,74 € with VAT |
| 16x16 P10 - for steel |
On request
|
7,74 € with VAT |
| 16x16 P20 - for steel |
On request
|
7,74 € with VAT |
| 16x16 P30 - for steel |
On request
|
7,74 € with VAT |
| 16x16 P45 - for steel |
On request
|
7,74 € with VAT |
| 16x16 K10 - for cast iron |
In stock
(3x)
|
7,74 € with VAT |
| 16x16 U10 - for INOX |
On request
|
7,74 € with VAT |
| 16x16 U30 - for INOX |
On request
|
7,74 € with VAT |
| 20x20 P10 - for steel |
On request
|
9,69 € with VAT |
| 20x20 P20 - for steel |
On request
|
9,69 € with VAT |
| 20x20 P30 - for steel |
On request
|
9,69 € with VAT |
| 20x20 P45 - for steel |
On request
|
9,69 € with VAT |
| 20x20 K05 - for cast iron |
On request
|
9,69 € with VAT |
| 20x20 K10 - for cast iron |
On request
|
9,69 € with VAT |
| 20x20 U10 - for INOX |
On request
|
9,69 € with VAT |
| 20x20 U30 - for INOX |
In stock
(5x)
|
9,69 € with VAT |
| 25x25 P10 - for steel |
On request
|
14,33 € with VAT |
| 25x25 P20 - for steel |
In stock
(5x)
|
14,33 € with VAT |
| 25x25 P30 - for steel |
On request
|
14,33 € with VAT |
| 25x25 P45 - for steel |
On request
|
14,33 € with VAT |
| 25x25 K10 - for cast iron |
In stock
(3x)
|
14,33 € with VAT |
| 25x25 U30 - for INOX |
On request
|
14,33 € with VAT |
| 32x32 P10 - for steel |
On request
|
21,07 € with VAT |
| 32x32 P20 - for steel |
On request
|
21,07 € with VAT |
| 32x32 P30 - for steel |
On request
|
21,07 € with VAT |
| 32x32 P45 - for steel |
On request
|
21,07 € with VAT |
| 32x32 K10 - for cast iron |
On request
|
21,07 € with VAT |
| 32x32 U10 - for INOX |
On request
|
21,07 € with VAT |
| 32x32 U30 - for INOX |
On request
|
21,07 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- DENAS
- Warranty:
- 24 months
Product information
Left side turning knife with soldered blade
Knife size: (clamping height x width): according to the selected variant
Overall length: see product description for selected variant
Carbide: according to the selected variant
Carbide marking:
P - steel
K - cast iron
U - stainless steel, heat-resistant alloys
Carbide numbering:
05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface
10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface
20 - semi-roughing - clean turning
30 - roughing, interrupted cut
45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions
Use: according to the selected variant
Standard: ČSN 223717 / CSN 22 3717, DIN4980, DIN4980L, ISO6
Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Knife size: (clamping height x width): according to the selected variant
Overall length: see product description for selected variant
Carbide: according to the selected variant
Carbide marking:
P - steel
K - cast iron
U - stainless steel, heat-resistant alloys
Carbide numbering:
05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface
10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface
20 - semi-roughing - clean turning
30 - roughing, interrupted cut
45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions
Use: according to the selected variant
Standard: ČSN 223717 / CSN 22 3717, DIN4980, DIN4980L, ISO6
Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!