Touch-color paint paste yellow, 35 g

Insulating pastes are medium-viscosity pastes intended for marking unevenness when fitting the contact surfaces of machine parts(planar and rotating) and molds. .
Pastes are good to adhere to any surface, do not smudge and do not dry.
It is mainly used in mechanical engineering, in agricultural and repair companies.
Pastes are non-toxic, they do not contain any harmful fillers or pigments.
Blue or red ink paste is commonly used on common inequalities, but we also recommend trying a combination of blue and yellow ink paste(blue on the guide surfaces and yellow on the ruler) and thus we will achieve an emphasis on resolution for unevenness. At the same time, the effect of glare from the ground surface is removed.
Package 35g - plastic box(non-original packaging)

Instructions for use:
1. The contact surfaces of the machine parts are cleaned to get rid of mechanical impurities
2. Using rolled felt or felt, apply the paste paste and spread evenly.
3. Inequalities on a flat interface are indicated by a writing ruler. A measure of correct finishing is the achievement of 24 - 31 scratched areas on the surface of 25 x 25 mm(I. accuracy class)
4. At the rotating surfaces, it is applied to the pin, the shaft by which the case is described.
5. You can easily get rid of discolored hands soiled by washing the paste by first washing them with a small amount of oil and then using a handwashing agent - for example. Solvin, or use DW 11 cleaner from Dawex Chemical, which can also be found in our offer.