Touch-color paint paste blue, FULL PACKAGE 350G

Insulating pastes are medium-viscosity pastes intended for marking unevenness when matching the contact surfaces of machine parts( planar and rotating) and forem.
Pastes are good to adhere to any surface, do not smudge and do not dry.
It is mainly used in mechanical engineering, in agricultural and repair companies.
Pastes are non-toxic, they do not contain any harmful fillers or pigments.
Blue or red ink paste is used on the usual marking of inequalities, but we also recommend trying a combination of blue and yellow ink paste(blue on the guide surfaces and the yellow on the ruler) and thus we will achieve an emphasis on the resolution of inequalities. At the same time, the effect of glare from the ground surface is removed.
Package 350g - plastic box

Instructions for use:
1. The contact surfaces of the machine parts are cleaned to get rid of mechanical impurities
2. Using rolled felt or felt, apply the paste paste and spread evenly.
3. Inequalities on a flat interface are indicated by a writing ruler. A measure of correct finishing is the achievement of 24 - 31 scratched areas on the surface 25 x 25 mm(I. accuracy class)
4. At the rotating surfaces, it is applied to the pin, the shaft by which the case is described.
5. You can easily get rid of discolored hands soiled by washing the paste by first washing them with a small amount of oil and then using a handwashing agent - for example. Solvin, or use DW 11 cleaner from Dawex Chemical, which can also be found in our offer.