Threaded lathe holder SER 3232 P16, Carmex
| 10x10mm / 11 ER |
On request
|
100,53 € with VAT |
| 12x12mm x 125mm / 11 ER |
On request
|
100,53 € with VAT |
| 12x12mm x 150mm / 11 ER |
On request
|
110,56 € with VAT |
| 12x12mm / 16 ER |
On request
|
100,53 € with VAT |
| 16x16mm / 16 ER |
On request
|
100,53 € with VAT |
| 20x20mm / 16 ER |
In stock
(1x)
|
100,53 € with VAT |
| 25x25mm / 16 ER |
In stock
(2x)
|
105,26 € with VAT |
| 25x25mm / 22 ER |
On request
|
114,57 € with VAT |
| 25x25mm / 27 ER |
In stock
(1x)
|
149,64 € with VAT |
| 32x32mm / 16 ER |
On request
|
149,65 € with VAT |
| 32x32mm / 22 ER |
On request
|
158,97 € with VAT |
| 32x32mm / 27 ER |
On request
|
191,72 € with VAT |
| 40x40mm / 22 ER |
On request
|
0,00 € with VAT |
| 40x40mm / 27 ER |
On request
|
0,00 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000514988
- Brand:
- CARMEX
- Warranty:
- 24 months
- Code:
- CX-SER-3232-P16
Product information
Knife for external thread turning SER3232P16
Thread knife holder, for threaded inserts
Clamping dimensions: 32x32 mm
Replaceable inserts are marked 16 ER
Height to the edge of the insert: 32mm
Total length of the knife: 170mm
Other dimensions - see the attached catalog sheet
A key for changing the blade is supplied with the product
The holder is without a threaded plate - must be purchased additionally.
Variants
Accessories
-
AE16-0 washer for 16ER and 16IL inserts, Carmex
AE16-0 washer for grooving / grooving three-sided inserts For Carmex external right and internal left threaded holders - bed size 16 - for 16ER/IL inserts If you want a threaded holder to fit with a grooving plate, you need to use this plate. Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock14,81 € with VAT -
Washer AE16 ( 1.5°) for threaded inserts 16ER and 16IL, Carmex
Base plate AE16 for threaded inserts 16 ER and 16 IL Angle: 1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock11,34 € with VAT -
Washer AE16 (-0.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: -0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT -
Washer AE16 (-1.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: -1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT -
Washer AE16 ( 0.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT -
Washer AE16( 2.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 2.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT -
Washer AE16 ( 3.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 3.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT -
Washer AE16 ( 4.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 4.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,79 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!