Threaded lathe holder SER 2525 M16, Carmex
| 10x10mm / 11 ER |
On request
|
100,50 € with VAT |
| 12x12mm x 125mm / 11 ER |
On request
|
100,50 € with VAT |
| 12x12mm x 150mm / 11 ER |
On request
|
110,53 € with VAT |
| 12x12mm / 16 ER |
On request
|
100,50 € with VAT |
| 16x16mm / 16 ER |
On request
|
100,50 € with VAT |
| 20x20mm / 16 ER |
In stock
(1x)
|
100,50 € with VAT |
| 25x25mm / 16 ER |
In stock
(2x)
|
105,23 € with VAT |
| 25x25mm / 22 ER |
On request
|
114,55 € with VAT |
| 25x25mm / 27 ER |
In stock
(1x)
|
149,62 € with VAT |
| 32x32mm / 16 ER |
On request
|
149,63 € with VAT |
| 32x32mm / 22 ER |
On request
|
158,95 € with VAT |
| 32x32mm / 27 ER |
On request
|
191,69 € with VAT |
| 40x40mm / 22 ER |
On request
|
0,00 € with VAT |
| 40x40mm / 27 ER |
On request
|
0,00 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 2000011000745
- Brand:
- CARMEX
- Warranty:
- 24 months
- Code:
- CX-SER-2525-M16
Product information
Knife for external thread turning SER2525M16
Holder for threaded knife, for threaded inserts
Knife has size 25x25 mm
Height per insert edge: 25mm
Total length of the knife: 150mm
Replacement blades are marked 16 ER
The product comes with a key for blade replacement
The holder is without a threaded plate - must be purchased.
Variants
Accessories
-
AE16-0 washer for 16ER and 16IL inserts, Carmex
AE16-0 washer for grooving / grooving three-sided inserts For Carmex external right and internal left threaded holders - bed size 16 - for 16ER/IL inserts If you want a threaded holder to fit with a grooving plate, you need to use this plate. Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock14,81 € with VAT -
Washer AE16 ( 1.5°) for threaded inserts 16ER and 16IL, Carmex
Base plate AE16 for threaded inserts 16 ER and 16 IL Angle: 1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
In stock11,34 € with VAT -
Washer AE16 ( 4.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 4.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT -
Washer AE16 ( 3.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 3.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT -
Washer AE16( 2.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 2.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT -
Washer AE16 ( 0.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: 0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grommet plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT -
Washer AE16 (-1.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: -1.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT -
Washer AE16 (-0.5°) for threaded inserts 16ER and 16IL, Carmex
AE16 washer for threaded inserts 16 ER and 16 IL Angle: -0.5° For Carmex threaded holders - bed size 16 - under threaded insert 16 ER or 16 IL If you want to fit the threaded holder with a grooving plate, you need to use another washer (type AE16-0). Only suitable for Carmex mounts, compatibility with other brands cannot be guaranteed.
On request14,77 € with VAT
Alternatives
-
Thread turning knife SER 2525 M16C, AKKO
Holder for exchangeable inserts for external thread SER 2525 M 16 C Knife for external turning thread SER2525M16C Holder For the threaded knife, for threaded slices The knife has a size of 25x25 mm Height after running plates: 25mm Total blade length: 150mm Interchangeable blades are marked 16ER The goods are supplied with a key for exchanging the blade Holder is without threaded plate - must be purchased separately.
In stock67,07 € with VAT -
Threaded turning knife SER 2525 M16
SER 2525 M 16 Male Thread Socket Holder SER2525M16 Thread End Knife SER2525M16 Thread Blade Holder for Thread Slices Knife Width 25x25 mm Plate Blade Height: 25mm Overall length of the blade: 150mm The slicing angle is selectable from -1.5 ° to 4.5 ° with the washers. Pads can be offered on request. Replacement slices are marked 16ER The mat is supplied with the key and the socket replacement key The holder is without a threaded plate - it is necessary to buy.
In stock48,15 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!