Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Threading head ZHA - HERBERT, size 1, ČSN 241540
Clearance saleZha - HERBERT I., resp. Ic. M3 M8 > Head Height: 50mm Diameter of Clamping Stop: 20mm Clamping Shank Length: 70mm Overall Length: 120mm ČSN 24 1540 Čepice jsou normované podle normy ČSN 223260, ie: Jaws size: Height: 11mm Width: 4,0mm You will find the time manual for the head in the enclosed PDF file.
On request798,68 € with VAT -
Threading head ZHA - HERBERT, size 2, ČSN 241540
Clearance saleZha - HERBERT II Threading Head. - herbstock M6 - M12 or M6-M14 Inches: W 3/16 "- W 1/2" Tubular thread: G 1/8 "- G 1/4" Head diameter: 65mm Head height: 62mm Diameter of chuck stem: 30mm Clamping length: 60mm Overall length: 122mm Standard: ČSN 24 1540 Jaws are normalized according to ČSN 223260, ie: Jaws size: Height: 13mm Width: 6, 4mm You will find a time manual for the head in the enclosed PDF file.
On request798,68 € with VAT -
Threading head ZHA - HERBERT, size 3, ČSN 241540
Clearance saleZha - HERBERT III Thread Head - Herbertka - 4 " Pipe Thread: G 1/8" - G 5/8 " ČSN 24 1540 Jaws are standardized according to ČSN 223260, ie: Jaws Size: Height: 19mm Width: 8mm You will find the time manual for the head in the enclosed PDF file.
On request790,70 € with VAT -
Rolling head for threads Zhv 6-10, ČSN 241560 /211 022/ , Narex MTE
Clearance saleThreaded roller head NAREX, type ZHV CSN 241560 metric: M6 to M10 - whitworth : BSW 5 / 16x18, 3 / 8x16, - whitworth: BSF 1 / 4x26, 5 / 16x22, 3 / 8x20 - united whitworth: UNC 5 / 16x18, UNF 1 / 4x28, 5 / 16x24, 3 / 8x24 - Tubular: G 1 / 8x28 Rollers with dimensions: Width: 14mm Clamping hole: br> The head is without roles - these are needed to buy the head. More about use - see attached manuals
On request2.437,82 € with VAT -
Round thread die UNF 10 x 32 z / 1 "HSS, VOLKEL
Threaded eye with jaws / Threaded eye with jaws Size: UNF No.10(corresponds to 4,826mm) Pitch: 32 z / 1 "(go to inch) Thread tolerance - fitting: 2A Outer eye diameter: 20mm Material: HSS - High speed steel American unified thread UNF - fine pitch Peak angle: 60 Â ° < br> Standard: DIN 223 standard!Also standard: DIN EN 22568 UNF thread: Fine American inch thread with the same profile as my metric thread(60 Â °), but with a pitch in inches
In stock13,25 € with VAT -
Round thread die M6 HSS machine 6g, CZTOOL
Machine threaded eye with jaw / threaded eye with jaws Size M6 mm Glide: 1,0, ie basic M6x1,0 Tolerance: 6g Metric thread Outer diameter Eyelets: 20mm Thickness of the eyes: 7mm www.normservis.com ASTM standards available in electronic (PDF) and paper formats STN EN 22 3216 / CSN EN 223216 - Material: HSS - High-speed steel
In stock9,57 € with VAT -
Round thread die M10 HSS machine 6g, CZTOOL
Machine threaded eye with jaw / threaded eye with jaws Size M10 mm Grip: 1.5, ie basic M10x1.5 Tolerance: 6g Thread Metric Thread Outer diameter Eyelets: 30mm Thickness: 10mm www.normservis.com ASTM standards available in electronic (PDF) and paper formats STN EN 223216:
In stock11,60 € with VAT -
Round thread die M16 HSS machine 6g, CZTOOL
Machine threaded eye with jaw / threaded eye with jaws Size M16 mm Grip: 2.0, ie basic M16x2.0 Tolerance: 6g Metric thread Outer diameter Eyelets: 38mm Thickness: 14mm www.normservis.com ASTM standards available in electronic (PDF) and paper formats STN EN 223216:
In stock21,83 € with VAT -
Left-sided round thread die M50x1,5 HSS, CZTOOL
Thread left eye with jaw / threaded eye with jaws Size M 50x1,5 mm Grip: 1,5, ie fine M 50x1,0 LH Tolerance: 6g Metric thread Left Ejector outer diameter: 90mm - CSN EN 22 568 / CSN EN 22568 (ĆSN 22 3210 / CSN 223210) - Material: HSS - High-speed steel
On request186,36 € with VAT