Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Machine tap M12x1,5 HSSE PM HL ISO2(6HX) DIN374 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) M 12x1,5 R45 PM in helix Pitch: 1,5, fine Fitting: ISO2 / 6H - grinder Thread profile Standard: DIN 374 Thread start: C, 2 strokes - see attached photo Material: HSSE-PM(High speed cutting) Â!Steel 5 coating, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can also be used in emergencies for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request56,69 € with VAT -
Machine tap G 3/8 HSSE PM HL DIN5156 spiral (45°) MasterTap, FANAR
Machine spiral tap(high speed) G3 / 8 "R45 PM in helix Size: 3/8" Pitch: 19 walking per inch Thread start: C, 2 courses - see attached photo Material: HSSE-PM(High speed steel 5 wrap, forging) Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with a hardness of 2600 HV helix angle: 45 Â ° Standard: DIN5156, DIN ISO228 Grinding profile thread Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat- resistant steels, can also be used in an emergency on a piece cut It turns into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
In stock74,63 € with VAT -
Machine tap UNF 1/2 x 20 HSSE PM-FAN TiAlSiN 2B DIN374 spiral (40°) , FANAR
Machine spiral tap ( high-speed ) UNF 1/2 R40 PM TC 1200 in FAN helix Dimension: 1/2" ( = 12.70mm) Number of strokes per inch: 20 Fit: 2B, ground thread profile Standard: DIN 374 Thread lead: C, 2 courses - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Grounded thread profile Coating: TiAlSiN Helix angle: 40° Use: 1.4: Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Ball and tempered cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low alloy steel, steel castings up to 1100N/mm2 6.4 : Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2: Duroplastics and hardened plastics FANAR taps correspond in quality to Czech N@rex taps, series 2680
In stock42,96 € with VAT -
Machine tap G 1/8 HSSE PM S-NC TiCN DIN5156-E spiral (45°), FANAR
Machine spiral tap for NC / CNC machines (high speed) G 1/8 "in S-NC helix Angle: 28 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting
On request32,26 € with VAT -
Machine tap G 1/4 HSSE PM S-NC TiCN DIN5156-E spiral (45°), FANAR
Machine spiral tap for NC / CNC machines (high speed) G 1/4 "in S-NC helix Angle: 19 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting
In stock60,60 € with VAT -
Machine tap M12x1.5 HSSE PM HL ISO2E (6HX) DIN374 spiral (45°) MasterTap , FANAR
Machine spiral tap ( quick-cutting ) M 12 R45 PM in helix 12x1.5 Pitch: 1.5, fine Fit: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread pitch: E, 1.5-2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Grounded thread profile Coating : HL - Balinit HardLube with carbide component (TiAlN WC / C) with hardness 2600 HV Helix angle : 45° Use : Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.
On request81,92 € with VAT -
Forming tap M16 HSSE-PM TiN ISO2(6HX) DIN376 without lubrication groove, FANAR
M 16x2,0 Moulder Thread without Lubrication Groove Form: C (2 Beam Sections) Face: ISO 2, 6HX Material: HSSE-PM (5% Cobalt Cobalt Co5 , production by sintering) Coating: TiN DIN 376, DIN 2174, ČSN 223052 Application: 1.1: Soft steel and magnetic steel up to 400N / Home 1.2 mm2: cutting steel, structural steel and carburizing to 500N / mm2 Home 2.2: Austenitic steel Corrosion in 850nm / mm2 6.3 Home brass machinable to 700N / mm2 Home 7.1: 350N to Alu / mm2 7.2: Aluminum alloy containing Si
In stock55,99 € with VAT -
Machine tap M10 spiral DIN 371 B ISO2 6H HSSE PM HL - DC SWISS
Clearance saleZ362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10
On request21,57 € with VAT -
Machine tap G 1/4 - 19 extended L = 200mm HSS spiral DIN5156, CZTOOL
Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 1/4 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes
On request103,55 € with VAT