Thread cutting

Short NPT machine tap, straight groove with chip breaker, for conical pipe thread Size: 1/2" Pitch: 14 turns per inch Taper: 1: 16 Apical angle: 60° Form: B Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloy and low-alloy steels For manual and machine application For through holes

Short machine tap NPT, spiral, for conical pipe thread Size: 1/4" Pitch: 18 turns per inch Taper: 1:16 Apex angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloy steel For manual and machine application For blind holes

Extension for tap Four edges: 5,5mm Total length: 110mm Material: Metal(blackened or galvanized / nickel-plated) Standard: ÄOSN 24 1151 / CSN 241151 or DIN 377 Suitable for orchard taps according to ÄOSN 223010: --- Suitable for orchard taps according to DIN352: M9, M10, UNC 3/8, UNF 3/8 Suitable for machine taps according to DIN371: --- Suitable for machine taps according to DIN374: M10 Suitable for machine taps according to DIN376: M10 Suitable for orchard taps according to DIN5157: G 1 / 8 "

Holder for exchangeable inserts for external thread SER 2525 M 16 C Knife for external turning thread SER2525M16C Holder For the threaded knife, for threaded slices The knife has a size of 25x25 mm Height after running plates: 25mm Total blade length: 150mm Interchangeable blades are marked 16ER The goods are supplied with a key for exchanging the blade Holder is without threaded plate - must be purchased separately.

Interchangeable inserts holder for internal thread SIL S16M 11 Knife for internal turning of threads, for threaded inserts, equivalent to SNL knife Threaded knife holder, for threaded inserts Clamping diameter: 16 mm Replaceable blades are marked 11 IL or 11 NL Total length of the knife: 150mm A key for changing the blade is supplied with the product The holder is without a threaded plate - necessary to buy. Carmex, Pramet, Iscar and other plates fit into the holder.

Interchangeable insert holder for internal thread SIL S20x16P 16 Knife for internal thread turning, for threaded inserts, equivalent to SNL knife Threaded knife holder, for threaded inserts Clamping diameter: 20 mm , at the edge lightened to a diameter of 16 mm Replaceable blades are marked 16 IL or 16 NL Total length of the knife: 170 mm A key for changing the blade is supplied with the goods The holder is without a threaded plate - must be purchased additionally. Carmex, Pramet, Iscar and other plates fit into the holder.

Holder for exchangeable inserts for internal thread SIR S16M 11 Knife for internal turning of thread, for thread inserts, equivalent knives SNR Thread knife holder, for thread blades The size of the knife is: diameter 16 mm Overall length knives: 150mm Replacement blades are marked 11NR or 11 IR The key is supplied with the goods for exchanging the blade Holder is without threaded plate - must be purchased separately. Carmex, Pramet, Iscar and other plates fit in the holder.

Holder for exchangeable inserts for internal thread SIR S25R 16C Knife for internal turning of threads, for thread inserts, equivalent knives SNR Thread knife holder, for thread blades The size of the knife is: diameter 25 mm Overall length knives: 200mm Interchangeable blades are marked 16NR or 16 IR The key is supplied with the goods for exchanging the blade Holder is without threaded plate - must be purchased separately. Carmex, Pramet, Iscar and other plates fit in the holder.

Hand orchard left tap M 12x1,0 - LH No. 1 - before cutting Pitch: 1,0, fine, ie M12x1,0 Material: HSS - High speed steel Fitting: ISO2 / 6H - ground thread profile Standard: ISO529

Machine tap M 6,5x0,75 - No.3 - Cutting Grade: 0,75, fine, ie M6,5x0,75 Material: HSS (high-speed steel)

Machine tap M 8x1.5 - set Pitch: 1.5, fine, i.e. M8x1.5 Tolerance: 6H Material: HSS(high-speed steel) Standard: DIN352