Thorns with stones

Product count: 12
  • Milling mandrel for milling head with transverse driving groove , DIN2080

    Milling mandrel for milling head with transverse driving groove , DIN2080

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 38,71 € with VAT
  • Milling mandrel for milling head with transverse driving groove, CSN 241440, Zbrojovka

    Milling mandrel for milling head with transverse driving groove, CSN 241440, Zbrojovka
    Clearance sale

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: ČSN241440 / DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

    from 50,15 € with VAT
  • Milling mandrel for milling head with transverse driving groove DIN2080 , MCT

    Milling mandrel for milling head with transverse driving groove DIN2080 , MCT

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 59,18 € with VAT
  • Milling mandrel for milling head with a transverse driving groove, DIN69871

    Milling mandrel for milling head with a transverse driving groove, DIN69871

    Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 34,38 € with VAT
  • Milling mandrel for milling head with transverse driving groove DIN69871, MCT

    Milling mandrel for milling head with transverse driving groove DIN69871, MCT

    Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the bearing surface of the socket cutter: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    Price - On request
  • Milling mandrel for milling cutters with longitudinal guide groove, DIN69871, MCT

    Milling mandrel for milling cutters with longitudinal guide groove, DIN69871, MCT

    Milling mandrel for clamping end mills with longitudinal groove SK40x16-35 Method of clamping the cutter: pen Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Length of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see the attached catalog sheet Standard: DIN 69871-A / PN 247226 Maximum circumferential runout on the clamping surface measured against the clamping shank: 0.005 mm Balance: G6.3 / 15,000 rpm.

    Price - On request
  • Milling mandrel for milling head with a transverse driving groove, BT / JIS 6339 MAS

    Milling mandrel for milling head with a transverse driving groove, BT / JIS 6339 MAS

    Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Other dimensions: see product description for individual variants Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 36,03 € with VAT
  • Milling arbor ISO 40x22-100 for milling cutters with transverse driving groove, JIS 6339 M

    Milling arbor ISO 40x22-100 for milling cutters with transverse driving groove, JIS 6339 M

    Milling arbor for clamping plug-in cylindrical milling cutters with cross groove with internal cooling BT40x22-100 chl. Clamping method of milling cutter: stones and screw Clamping cone: ISO 40 Thread for pull-in pin: M16 Cylindrical diameter Cutter cutter parts: 22mm Cylindrical cutter length: 19mm < br> Distance from collar to face of the milling cutter: 100mm Thread screw for clamping the milling cutter: M10 Standard: JIS6339 MAS ??â € ‹â €‹ BT AD B(internal Coolant inlet) Balance: G6.3 / 12.000rpm.

    In stock
    49,10 € with VAT
  • Milling arbor SK 40x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr

    Milling arbor SK 40x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr
    Clearance sale

    Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

    On request
    100,32 € with VAT
  • Milling arbor SK 50x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr

    Milling arbor SK 50x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr
    Clearance sale

    Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.

    In stock
    186,78 € with VAT
  • Milling arbor SK 50x40, PN 241461, Zbrojovka

    Milling arbor SK 50x40, PN 241461, Zbrojovka

    Milling Cutter for Socket Cylindrical Milling Cutters Milling Cutter Type: Stones and 4x M12 Screw Clamping Taper: SK ISO 50 Internal Thread: M24 Diameter: 40mm Length of Clamping Part : 38mm Screw: Cross-head M20 Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Use: These spindles are used for clamping pre-cut tools.

    In stock
    205,70 € with VAT
  • Milling arbor SK 50x40-90 for milling cutters with transverse driving groove, PN 247225

    Milling arbor SK 50x40-90 for milling cutters with transverse driving groove, PN 247225

    Unused milling mandrel for clamping end mills Method of milling cutter: stones and screw Clamping cone: SK ISO 50 Â!Vit for spindle screw: M24 Cylindrical diameter for end mill: 40mm Cylindrical length Cutter part: 25mm Distance from collar to end of clamping part: 90mm Thread screw for clamping of cutter milling cutters: M20 Standard: PN 247225 /(type 591 006 - 03 )

    On request
    81,20 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Thorns with stones