Thorns with a longitudinal groove
-
Milling mandrel for milling head with a longitudinal driving groove ČSN 241411, Zbrojov
Clearance saleMilling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241411 / CSN 24 1411 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The goods come from excess stock, unused
from 41,06 € with VAT -
Milling mandrel for milling cutters with longitudinal grooves, ČSN 241421, Zbrojovka
Clearance saleMilling mandrel for clamping cylindrical socket cutters, securing with two keys / for milling heads with cylindrical drilling Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241421 / CSN 24 1421 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused
from 28,76 € with VAT -
Long milling mandrel CSN 241431, Zbrojovka
Clearance saleLong milling mandrel for clamping socket cylindrical / circular cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241431 / CSN 24 1431 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.
from 47,86 € with VAT -
Milling arbor for cylindrical end mills DIN ISO 50x40x60 PN247220
Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 40mm Hole lka chucks for milling cutters 60mm M20 screws with cross head < br> A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, not used  ©
In stock57,43 € with VAT -
Milling arbor for cylindrical end mills DIN ISO 50x60x35 PN247220
Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 60mm Hole lka clamping parts for milling cutters 60mm M30 screws with cross head A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, unused  ©
In stock59,82 € with VAT -
Long milling mandrel SK 30x16x250, ČSN 241431, Zbrojovka
Clearance saleLong milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.
On request47,86 € with VAT