TC-820 / GT-20 tapping adapter for machine taps
M6 - DIN371 |
In stock
(2x)
|
49,92 € with VAT |
M8 - DIN371 |
In stock
(3x)
|
49,92 € with VAT |
M10 - DIN371 |
In stock
(7x)
|
49,92 € with VAT |
M8 - DIN376 |
In stock
(6x)
|
49,92 € with VAT |
M10 - DIN376 |
In stock
(30x)
|
49,92 € with VAT |
M12 - DIN376 |
In stock
(6x)
|
49,92 € with VAT |
M14 - DIN376 |
In stock
(9x)
|
49,92 € with VAT |
M16 - DIN376 |
In stock
(3x)
|
49,92 € with VAT |
M18 - DIN376 |
In stock
(7x)
|
49,92 € with VAT |
M20 - DIN376 |
In stock
(11x)
|
49,92 € with VAT |
M22 - DIN376 |
On request
|
49,92 € with VAT |
M24 - DIN376 |
In stock
(2x)
|
49,92 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- Vertex nebo jiný
- Warranty:
- 24 months
Product information
The attachment clamps taps:
DIN 371 (reinforced shank): see attached table
DIN 376 (classic shank): see attached table
Method of clamping the tap:
The taps are secured in the extension by a square and a clamping shank.
The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension.
Features :
The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed.
This insert fits into a thread cutter - see related products. Cannot be used alone.
Variants
Accessories
-
BT tapping head for TC type adapters with length compensation
Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (steep ISO cone): according to the selected variant Standard: JIS 6339 BT The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
from 143,77 € with VAT -
NC tapping head for TC type adapters with length compensation, VERTEX
Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (cylindrical): according to the selected variant Clamping shank length: see description for variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
from 106,46 € with VAT -
Morse tapping head for TC type adapters with length compensation, VERTEX
Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
from 3,16 € with VAT -
Tapping head DIN69871 for TC type extensions with length compensation
Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (steep ISO cone): according to the selected variant Standard: DIN69871 The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
from 135,35 € with VAT -
Morse tapping head for TC type adapters , VERTEX
Quick-clamping tapping head without length compensation for attachments for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant This type (SF) is without length compensation! The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
from 70,92 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!