Taps and dies

Left machine spiral screw( speed 29 M 27x2,0, R40 SE 800 Size: M27x2,0 Pitch: 2,0, fine Fitting: ISO2 / 6H - grinding profile thread < br> Standard: DIN 374 C Start thread: C, 2 courses - see attached photo Material: HSSE( Speed ??â € ‹â €‹ Cut steel 5% Cobalt) Coating: without coating angle helix: 40  ° Application: Structural and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long weight Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloyed and low-alloyed alloys copper Alloys aluminum with content Si

Left machine spiral tap(high speed) M 20, R40 SE 800X spiral, in helix Size: M20x2,5 Pitch: 2,5, basic left, LH Fitting: ISO2 / 6H - ground thread profile Standard: DIN 376 C Thread start: C, 2 runs - see attached photo Material: HSSE(High speed steel 5 wrap) Grinding thread profile Helix angle: 40 Â ° Coating: TiN - Titanium Nitride Application: Steel Stainless steel Cast iron Non-ferrous metals

Face tap G 1/4 "with lubrication groove Thread type: G 1/4(BSP 1/4) Number of passes Inches: 19 Form: C(2 ramps) Material: HSSE( High-speed steel) Coating: TiN Standard: DIN 5156, DIN ISO 228 Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Stainless steels, construction and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Long-weight brass up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

Machine tap( high-speed cutter 29 M 12, straight groove with chip breaker 12x1.75 PM 1400 TC Pitch: 1.75, set Positive Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 Thread start: B, 4-5 gauges - see application © photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color coding: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(-copper-zinc steel with short cut ) 4.9: Copper alloys with short hair

Machine tap G / BSP, straight slot chip breaker, for pipe thread Size: 1/2" Pitch: 14 steps per inch Peak angle: 55° Form: B, 4 courses - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Coating: HL - Balinit HardLube with carbide component (TiAlN WC / C) with hardness 2600 HV Standard: DIN 5156, DIN ISO 228 Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel.Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine tap( high-speed) M 12x1,25, straight slot with chip breaker 12x1.25 PM 1400 HT TC Pitch: 1.25, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread lead: B, 4-5 strokes - see attached photo Material: HSSE-PM( High speed steel 5% Cobalt, sintering production) Ground thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steels with short chip) 4.9: Copper alloys with short chip

Machine spiral tap ( quick cutting ) M 14 R15 PM TS 1400-HT in helix 14x1.0 Pitch: 1.0, fine Fit: ISO2 / 6HX - ground thread profile Standard : DIN 374 Thread lead : C , 2 courses - see attached photo Material : HSSE-PM ( High-speed steel 5% Cobalt , production by sintering ) Grounded thread profile Coating : TiAlSiN Helix angle : 15° Use : 1.5 : Hardened and hardened steels up to 38 HRC up to 1400N/mm2 1.6 : Steel alloys and hardened steels up to 44 HRC 3.1 : Gray cast iron 3.3 : Nodular and malleable cast iron up to 700N/mm2 4.6 : Brass (copper-zinc steel with short chip) 4.9 : Copper alloys with short chip

Machine spiral tap for NC / CNC machines (high speed) M 10 in helix 10x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 12 in helix 12x1,75 S-NC Gradient: 1,75, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steel, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: up to 400M / mm2 1.2: Construction and automation steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon with up to 5% silicon content up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 14 in helix 14x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 16 in helix 16x2,0 S-NC Gradient: 2,0, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap(high speed) M 10 R45 PM in helix 10x1,5 Pitch: 1,5, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 376 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting of thread into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.