Taps and dies
-
Round thread die R 1/4 NO, above standard
Threaded eye with jaws / Threaded eye with jaws Size R 1/4 "(BSPT / Rc 1/4) Rising !N: 19 z / 1 " Pipe thread Outer diameter of the eye: 38mm Standard: Ä ENSN EN 24 231 Corresponds to such © standard 22 3210 Material: NO - Tool Steel Not used from oversupply
In stock5,77 € with VAT -
Machine tap M3x0.35 HSSE ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 3x0,35 without chisel 3x0,35, 625 series Straight groove, cut thread profile Gradient: 0,35, fine Facing: ISO1 Form : C (lead length - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
In stock5,77 € with VAT -
Machine tap M12x1,5 HSSE ISO1 C without chip breaker, Narex
Clearance saleHome Machine tap (high speed) M 12x1,5 without chip breakers Home Total length: 118 mm Home straight groove cut thread profile Home Pitch: 1.5, fine Home Fit: Home ISO1 Form: C (lenght of the flow - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
In stock9,62 € with VAT -
Machine tap M14 HSSE ISO2 B without chip breaker, extended, Narex
Clearance saleExtensible machine tap M 14 without chip breaker 14x2,0 Overall length: 110mm Straight groove, cut thread profile Gradient: 2,0, basic Facing: ISO2 < br> Form: B (lenght of the run - see enclosed photo) CSN 22 3042 (DIN 376), extended series ČSN 223020 Material: HSSE - High-speed steel 5% Co
In stock11,83 € with VAT -
Machine tap M16x1,5 HSSE ISO1 C without chip breaker, Narex
Clearance saleHome Machine tap (high speed) M 16x1.5 without chip breakers Home straight groove cut thread profile Home Pitch: 1.5, fine Home Fit: ISO1 Home Form B (length of attack - see attached photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request15,49 € with VAT -
Machine tap M18 HSSE ISO2 C without chip breaker, Narex
Clearance saleMachine tap M 18 without chip breaker 18x2,5 Overall length: 125mm Straight groove, cut thread profile Gradient: 2,5, basic Face: ISO2 Form: C (lenght of run - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
In stock19,24 € with VAT -
Machine tap M22 HSSE ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 22 without chip breaker 22x2,5 Straight groove, cut thread profile Gradient: 2,5, basic Facing: ISO1 Form: C (run length - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request20,21 € with VAT -
Machine tap M30x2,0 HSS ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 30x2,0 without chamfer Straight groove, cut thread profile Gradient: 1,5, fine Facing: ISO1 Form: C (run length - see attached photo) Standard: CSN 22 3042 Material: HSS - High-speed steel
In stock38,48 € with VAT