Taps and dies

Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2

Abrasive stone for roller hammer 58-168mm Abrasive stone size: 11x100mm The set contains three abrasive stones. Suitable for head BS 101157 Grain: 220

Branding bit - hexagon side: 10 mm TORX has the size: T 40 Suitable for use with 10mm ratchet wrench or adapter for 3/8 "and 1/2" GOLA heads Material: Cr-V, ie Chrome-Vanadium High quality steel

Brand Bit - Hexagon Side: 10mm TORX Has Size: T 50 Suitable for use with 10mm Ratchet Wrench or Adapter for 3/8 "and 1/2" GOLA Heads Material: Cr-V, ie Chrome-Vanadium High quality steel

Brand short bit - hexagon side: 10 mm RM-RIBE head has size: 11 mm Suitable for use with 10mm ratchet wrench or adapter for 3/8 "and 1/2" GOLA head < br> Material: Cr-V, ie Chrome-Vanadium High quality steel S2 Load capacity: up to 5kg Usage: VAG cylinder head screws on gasoline engines Fiat, Thema, Ducato, Tipo, Tempra, Bravo, Brava, Lancia Kappa, Dedra, Alfa Romeo, Audi, VW, Subaru, Seat, Fiat, Skoda, Lancia

Brand Long Bit - Hexagon Side: 10mm RM-RIBE Head is Size: 11mm Suitable for use with 10mm Ratchet Wrench or Adapter for 3/8 "and 1/2" GOLA Heads < br> Material: Cr-V, ie Chrome-Vanadium High quality steel S2 Load capacity: up to 5kg Usage: VAG cylinder head screws on gasoline engines Fiat, Thema, Ducato, Tipo, Tempra, Bravo, Brava, Lancia Kappa, Dedra, Alfa Romeo, Audi, VW, Subaru, Seat, Fiat, Škoda, Lancia

Brand bit - hexagon side: 10 mm Imbus size: 5 mm Suitable for use with 10mm ratchet wrench or adapter for 3/8 "and 1/2" GOLA heads Material: Cr-V, ie Chrome-Vanadium High quality steel S2

Machine Tap( Speed ??Cutter 29 M 4, Straight Slot 4x0.7 PMS Pitch: 0.7, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine Tap( Speed ??Cutter 29 M 6, Straight Slot 6x1.0 PMS Pitch: 1.0, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine Tap( Speed ??Cutter 29 M 10, Straight Slot 10x1.5 PMS Pitch: 1.5, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine spiral tap M8, R15 1400 PMS IK TiCN with cooling opening Size: M8x1,25 Gradient: 1,25, basic Tire: ISO2 / 6HX - Grinding profile DIN 371 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, -Nitrid) Cutting Thread Profile Cooling Emulsion / Fluid Hole Helix Angle: 15 ° Number of Blades: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps

Machine spiral tap M10, R15 1400 PMS IK TiCN with cooling hole Dimension: M10x1,5 Gauge: 1,5, basic Facing: ISO2 / 6HX - Grinding profile DIN 371 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, -Nitrid) Cutting Thread Profile Cooling Emulsion / Fluid Hole Helix Angle: 15 ° Number of Blades: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps