/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage Metalworking tools Thread cutting Taps and dies

Taps and dies

Product count: 1467
1 ... 65 67 69 ... 123

  • Hand tap M 68 HSS-G DIN352 - set, VOLKEL

    Hand tap M 68 HSS-G DIN352 - set, VOLKEL

    Metric hand tap M68 - Set Grip: 6.0, basic, ie 68x6,0 (M68x6,0) Face: ISO2 / 6H - Cut Thread Profile Material: HSS- G - Rapid Steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

    On request
    1.342,29 € with VAT

  • Hand tap M 68 No.1 HSS-G DIN352, VOLKEL

    Hand tap M 68 No.1 HSS-G DIN352, VOLKEL

    Metric hand tap M68 I Gradient: 6.0, basic, ie 68x6,0 (M68x6,0) Facing: ISO2 / 6H - Cut Thread Profile Material: HSS-G - High-speed steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

    On request
    447,43 € with VAT

  • Hand tap M 68 No.2 HSS-G DIN352, VOLKEL

    Hand tap M 68 No.2 HSS-G DIN352, VOLKEL

    Metric hand tap M68 II Gradient: 6.0, basic, ie 68x6,0 (M68x6,0) Facing: ISO2 / 6H - Cut Thread Profile Material: HSS-G - High-speed steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

    On request
    447,43 € with VAT

  • Hand tap M 68 No.3 HSS-G DIN352, VOLKEL

    Hand tap M 68 No.3 HSS-G DIN352, VOLKEL

    Metric hand tap M68 III Gradient: 6.0, basic, ie 68x6,0 (M68x6,0) Face: ISO2 / 6H - Cut Thread Profile Material: HSS-G - High-speed steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

    On request
    447,43 € with VAT

  • Round thread die UNF 4 x 48 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 4 x 48 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 4-48 Dimension: UNF no. 4 (corresponds to 2.845mm) Gradient: 48 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread UNC (Unified Fine) Peak Angle: 60st. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    13,94 € with VAT

  • Round thread die UNF 5 x 44 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 5 x 44 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 5-44 Size: UNF no. 5 (corresponding to 3,175mm) Gradient: 44 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread UNC (Unified Fine) Top Angle: 60st. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    12,73 € with VAT

  • Round thread die UNF 6 x 40 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 6 x 40 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 6-40 Size: UNF no. 6 (corresponds to 3,505mm) Gradient: 40 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread - UNC (Unified Fine) Peak Angle: 60th. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    15,28 € with VAT

  • Round thread die UNF 8 x 36 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 8 x 36 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 8-36 Size: UNF no. 8 (corresponds to 4,166mm) Gradient: 36 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread - UNC (Unified Fine) Peak Angle: 60th. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    15,28 € with VAT

  • Round thread die UNF 10 x 32 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 10 x 32 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 10-32 Size: UNF no. 10 (corresponding to 4,826mm) Gradient: 32 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread - UNC (Unified Fine) Peak Angle: 60st. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    15,28 € with VAT

  • Round thread die UNF 12 x 28 z / 1 "HSS with chip breaker, CZTOOL

    Round thread die UNF 12 x 28 z / 1 "HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 12-28 Size: UNF no. 12 (corresponds to 5.486mm) Angle: 28 Strokes per inch Thread Tolerance - Fitting: 2A American Whitworth Thread - UNC (Unified Fine) Peak Angle: 60st. Outer Diameter: 20mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: American Inch Thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    14,51 € with VAT

  • Round thread die UNF 1 "x 12 z / 1" HSS with chip breaker, CZTOOL

    Round thread die UNF 1 "x 12 z / 1" HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 1 "x12 Size: UNF 1 (25.40mm) Grip: 12pcs per inch Thread Tolerance - Fitting: 2A American Whitworth Thread - UNC (Unified Fine) Top Angle: 60mm Outer Diameter: 55mm DIN EN 22 568 Material: HSS - High Speed ??Steel UNF Thread: An American inch fine thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    58,27 € with VAT

  • Round thread die UNF 1 1/8 "x 12 z / 1" HSS with chip breaker, CZTOOL

    Round thread die UNF 1 1/8 "x 12 z / 1" HSS with chip breaker, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 1 1/8 "x12 UNF 1 1/8 (28.575mm) Thread tolerance - fitting: 2A American Whitworth Thread - UNC (Unified Fine) Top Angle: 60mm Outer Diameter Eyelet: 65mm DIN EN 22 568 Material: HSS - High Speed Steel) Thread UNF: American inch fine thread with the same profile as the metric thread (60 °), but with a pitch in inches

    On request
    89,92 € with VAT

Do you need advice?

Jakub Novák, Orders

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Taps and dies