/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage Metalworking tools Thread cutting Taps and dies

Taps and dies

Product count: 1657
1 ... 29 31 33 ... 139

  • Machine tap M3 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M3 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 3 with chamfer, straight groove Gradient: 0,5, basic Facing: ISO2 - Cutting thread profile DIN 371 (reinforced stopper) > Material: HSSE (5% Cobalt Rapid Steel)

    On request
    10,19 € with VAT

  • Machine tap M4 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M4 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 4 with chamfer, straight groove Gradient: 0,7, basic Facing: ISO2 - Threaded profile DIN 371 (reinforced stopper) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    9,55 € with VAT

  • Machine tap M5 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M5 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 5 with chamfer, straight groove Gradient: 0,8, basic Facing: ISO2 - Cut thread profile DIN 371 (reinforced stopper) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    10,14 € with VAT

  • Machine tap M6 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M6 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 6 with chamfer, straight groove Gradient: 1.0, basic Facing: ISO2 - Cut thread profile Standard: DIN 371 (Reinforced stopper) > Material: HSSE (5% Cobalt Rapid Steel)

    On request
    10,35 € with VAT

  • Machine tap M8 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M8 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 8 with chamfer, straight groove Gradient: 1,25, basic Facing: ISO2 - Thread ground profile DIN 371 (reinforced stopper) > Material: HSSE (5% Cobalt Rapid Steel)

    On request
    11,63 € with VAT

  • Machine tap M10 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M10 HSSE ISO2 DIN371 with chip breaker, CZTOOL

    Machine tap M 10 with chamfer, straight groove Gap: 1.5, basic Facing: ISO2 - threaded profile DIN 371 (reinforced stopper) > Material: HSSE (5% Cobalt Rapid Steel)

    On request
    13,95 € with VAT

  • Machine tap M2 spiral HSSE ISO2 DIN371, CZTOOL

    Machine tap M2 spiral HSSE ISO2 DIN371, CZTOOL

    Machine tap M 2 with spiral grooves with threaded thread profile Gradient: 0.4, basic Helix groove 35 ° Facing: ISO2 / 6H - Threaded profile Norma : DIN 371 (Reinforced Shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    18,89 € with VAT

  • Machine tap M2,5 spiral HSSE ISO2 DIN371, CZTOOL

    Machine tap M2,5 spiral HSSE ISO2 DIN371, CZTOOL

    Machine tap M 2,5 with spiral grooves with threaded thread profile Gradient: 0.45, basic Helix groove 35 ° Facing: ISO2 / 6H - Threaded profile Norma : DIN 371 (Reinforced Shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    18,89 € with VAT

  • Machine tap M12 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M12 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M12 with straight groove chipper ISO2 - threaded profile DIN 376 (thin shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    17,76 € with VAT

  • Machine tap M14 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M14 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M 14 with straight groove chamfer Basic Face: ISO2 - Threaded profile DIN 376 (thin shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    24,62 € with VAT

  • Machine tap M16 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M16 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M16 with straight groove chipper Basic Face: ISO2 - Threaded profile DIN 376 (Thin shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    28,07 € with VAT

  • Machine tap M20 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M20 HSSE ISO2 DIN376 with chip breaker, CZTOOL

    Machine tap M 20 with straight groove chamfer ISO2 - cut thread profile DIN 376 (thin shank) Material: HSSE (5% Cobalt Rapid Steel)

    On request
    41,67 € with VAT

Do you need advice?

Jakub Novák, Orders

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Taps and dies