Taps and dies

Threaded eye with jaws / threaded eye with jaws Thread type: BA - British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Standard: BS1127, BS93 Material: HSS - High speed steel

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

Hexagon nut with collar Thread: M20 Hexagon Hardness: 34HRC Standard: no norm, resp. in replacement for ČSN 243530.2 or DIN 6331 Production technology: Pressing Total Nut Nut: 26mm Hexagon: 32mm

Set includes brackets with range: 64-95mm (2pcs) 90-140mm (2pcs) Next 6pcs of exchangeable styles of different shapes with diameters of 25mm. Supports serve to provide the position / stiffness of the workpiece clamp. By unscrewing the upper part of the support, it is secured in the set position by a locking nut.

Machine tap M 4 with chamfer, straight groove Gauge: 0,7, basic Taper: 2N Threaded rolled profile DIN 371 (reinforced stopper) Material: HSS - High-Speed ??Steel Usage: Non-alloy steels up to 600 N / mm2 Soft materials (brass, copper, aluminum) > Rolled taps with 2N mean tolerance are suitable for standard screw connections - no thread tolerance requirements. Thread pulling

Machine tap M 4 with chamfer, straight groove Gauge: 0,7, basic Facing: 2N Threaded rolled profile DIN 376 (Thin shank) Material: HSS - High-Speed ??Steel Usage: Non-alloy steels up to 600 N / mm2 Soft materials (brass, copper, aluminum) > Rolled taps with 2N medium tolerance are suitable for standard screw connections - no thread tolerance requirements. Thread pulling

Machine tap M 12 spiral groove Gradient: 1,75, basic Helix groove 35 ° Facing: 2N Rolled thread profile DIN 376 (Thin Usage: Non-alloy steels up to 600 N / mm2 Soft materials (brass, copper, aluminum) Rolled taps with 2N medium tolerance are suitable for standard screw connections - no thread tolerance requirements. Thread pulling

Machine tap M 6 straight groove Gradient: 0,5, fine Face: 2N Rolled thread profile DIN 374 (thin shank) Material: HSS - High-speed steel Uses: Non-alloy steels up to 600 N / mm2 Soft materials (brass, copper, aluminum) 2N tolerances are suitable for standard screw connections - no thread tolerance requirements. Thread pulling

Machine tap M 18 Straight Groove Gradient: 1,0, Fine Facing: 2N Thread Rolled Thread DIN 374 (Thin Shank) Material: HSS - High-speed steel Uses: Non-alloy steels up to 600 N / mm2 Soft materials (brass, copper, aluminum) 2N tolerances are suitable for normal screw connections - no thread tolerance requirements. Thread pulling

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 - set, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 I, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 II, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.