Taps and dies

Machine tap( high speed) helical groove / in helix with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt) Standard: DIN371 / DIN376 These taps can be supplied on request coated with 28TiN)

Trapezoidal nut tap Material: TS - Tool Steel ČSN 223096N / 22 3096N

Machine tap (high speed) with a drill in one Tolerance: ISO2 / 6H Material: HSSE - High speed steel + 5% Co5 = HSSCo5 Max. thread depth: 2xD Usage: Non-alloy and alloy steels with strength up to 800N / mm2 Copper, brass, aluminum alloys, zinc alloys Suitable for speed-switching machines for drilling and threading. Not suitable for tapping adapters.

Hand set tap G for pipe thread Climb: basic Fitting: A Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for thread stretching or for piece thread cutting.

Hand taps G - for pipe thread Thread type: G / BSP (British Standard Pipe) - British pipe thread Material: TS - Tool Steel Standard: CSN 22 3012 TS taps are suitable for thread drawing or for thread cutting. Manufacturer: Mostly Czech, possibly German or Polish production from the last century, unused - excess stock.

Machine tap, straight groove, for conical pipe thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSSE - High speed cobalt steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Machine tap (quick-cutting) without chip breaker with straight groove with conical pitch Size: according to the selected variant Ascent: according to the chosen variant Form: C (2-3 starting threads) Material: HSSE ( High speed steel +5% Cobalt ) Coating: without coating Thread type: NPT - American conical thread with a pitch of 1:16 Usage: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

HSSE-PM sintered steel set tap The pre-cutting tap has an insert with a drill diameter under the thread Fitting: AX Standard: DIN 5157, DIN-ISO 228 Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Hand set tap G for pipe thread Climb: basic Fitting: A Material: HSS - High speed steel Standard: ČSN 22 3012 / CSN 223012

Hand tubular tap G / BSP Thread type: English standard inch whitworth thread - British Standard Pipe thread Pitch: basic Material: HSS - High speed steel Standard: DIN5157, DIN ISO 228 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tubular tap G / BSP Thread type: English standard inch whitworth thread - British Standard Pipe thread Pitch: basic Material: HSSE - High speed cobalt steel HSSCo5 Standard: DIN5157, DIN ISO 228 Taps are suitable for cutting threads in common steels and stainless steels (up to 1200MPa)

Machine tap (quick-cutting) without chip breaker with straight groove with conical pitch Size: according to the selected variant Ascent: according to the chosen variant Form: C (2-3 starting threads) Material: HSSE ( High speed steel +5% Cobalt ) Coating: TiN Thread type: NPT - American conical thread with a pitch of 1:16 Usage : Steel Food grade stainless steel Cast iron Non-ferrous metals