Taps and dies

Machine tap with straight groove and chip breaker, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread start: B, 4 courses - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Extra long machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Carbide machine tap (high speed) M straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: VHM - (VollHartMetall) - carbide Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Carbide machine tap (high speed), straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: solid carbide Version with internal cooling Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Left machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Set tap made of sintered steel HSSE-PM There are 3 taps in the set for the basic pitch. For fine pitch, there are 2 taps in the set. The pre-cutting tap has an insert with a drill diameter under the thread Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 352/3-P Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Machine spiral tap (high speed) R15 SE 800 Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15 ° Usage: 4.2: Aluminum with silicon content: 1%

Machine spiral tap (high speed) R15 1400 PMS IK TiCN with cooling hole Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN (Titanium Carbon-Nitride) Ground thread profile + hole for cooling emulsion / liquid Helix angle: 15 ° Number of edges: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC up to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Heat-resistant stainless steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR taps correspond in quality to Czech N@rex taps

Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Extra long machine tap (high speed) with spiral groove / in helix Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: no coating Standard: DIN 371, DIN 376 Form: C (lead length 2 to 3 threads) Helix: 40 ° Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine spiral tap (high speed), R45 SE 800 Fitting: ISO2 / 6H - ground thread profile Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 45 ° Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys

Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting