Taps

Machine spiral tap( quick cut) M 6 R15 PM TS 1400-HT in helix 6x1,0 Pitch: 1,0 , basic Facial ISO2 / 6H - ground thread profile Standard: DIN 371 Thread start: C, 2 runs - see attached photo Material : HSSE-PM( High-speed steel 5% Cobalt, baking production) Grinding thread profile Coating: TiAlSiN angle angle screws: 15 ° Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9 : Copper alloys with short hair

Machine spiral tap( high speed cutter 29 M 4 R45 PM in helix 4x0,7 Pitch: 0,7, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency for cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutter 29 M 5 R45 PM in helix 5x0,8 Pitch: 0,8, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency to cut threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap(high speed) M 6 R45 PM in helix 6x1,0 Pitch: 1,0, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 371 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutting machine 29 M 10 R40 PM TC 1200 in helix 10x1,5 FAN Pitch: 1,5, basic Facial ISO3 / 6G - ground thread profile - free thread - zinc plated Standard: DIN 371 Thread start: C, 2 runs - see enclosed foto Material: HSSE-PM( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiAlSiN < br> Helix angle: 40 ° Application: 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 1.5: Hardening © and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball metallic and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics FANAR taps of the quality correspond to the Czech Republic !VitnAkA—m N @ rex, Series 2680

M 3x0.5 Moulder Thread with Lubrication Groove Form: C (2 Beam Drills) Face: ISO 3, 6GX (Plus Tolerance - Suitable for Use, eg Before Zinc Galvanizing) Material: HSSE-PM DIN 371, DIN 2174, ČSN 22 3052 Application: 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

M 10x1.5 Moulder Thread with Lubrication Groove Form: C (2-course) ISO 3, 6GX (plus tolerance - suitable for use, eg before galvanizing) Material: HSSE-PM (5% cobalt Co5, production by sintering) Coating: TiN DIN 371, DIN 2174, ČSN 22 3052 1.1: Soft steel and magnetic steel up to 400 N / mm2 1.2: Cutting, structural and cementitious steels up to 500 N / mm2 2.2: Austenitic corrosion-resistant steel up to 850 N / mm2 1.3: Structural and carbon steel, low-alloy steel, cast steel up to 1100N / mm2 6.3: long-shavings up to 700N / mm2 7.1: aluminum up to 350N / mm2 7.2: aluminum alloys with Si

WGN forming tap M 8x1.25 with lubrication groove with short lead and internal(2x drilling) by cooling Form: E(1,5-2 lead-in) Fitting: ISO 2 , 6HX Material: HSSE - PM( High-speed steel 5% cobalt Co5) Coating: TiCN Application: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Copper with zinc admixture with long chips

Machine tap ( quick-cutting ) M 6x1.25 without chip breaker Diameter: 6mm Pitch: 1.25, fine Fit: ISO2 - ground thread profile Standard: DIN 371 Material: HSSE ( High speed steel 5%Cobalt )

Machine tap ( quick-cutting ) M 33x1.0, straight groove Pitch: 1.0, fine Fit: ISO2 / 6H - ground thread profile Standard: ČSN 223042 Start-up thread: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Ground thread profile Use: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with long chip Automatic steel, structural and case-hardened steel Spherical and malleable cast iron Unalloyed and low-alloy copper alloys Alloys aluminum with Si content < 5% Thermoplastics

Machine tap with straight groove whitworth BSW 21.8 x 1/14, custom production Pitch: 14 feet per inch, basic(W21,8x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves

Machine tap with straight groove whitworth BSW 24,32 x 1/14, custom production Pitch: 14 feet per inch, basic(W24,32x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves