/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage Metalworking tools Thread cutting Taps and dies Taps

Taps

Product count: 972
1 ... 59 61 63 ... 81

  • Machine tap G 3/8 - 19 extended L = 200mm HSS spiral DIN5156, CZTOOL

    Machine tap G 3/8 - 19 extended L = 200mm HSS spiral DIN5156, CZTOOL

    Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 3/8 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes

    On request
    126,99 € with VAT

  • Machine tap short M7 HSS ISO2 E(6H) ISO529-D, FANAR

    Machine tap short M7 HSS ISO2 E(6H) ISO529-D, FANAR

    Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: E, 1,5 feed - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2

    On request
    8,18 € with VAT

  • Retention knob ISO40 - SK-40 B, ISO7388 B, drilled, BT-531

    Retention knob ISO40 - SK-40 B, ISO7388 B, drilled, BT-531

    Type B Type B Internal pin angle: 45 ° (see photo) d1: 18,95mm d2: 12,95mm d3: 17mm l1: 44,5mm l2: 16,4mm l3: 11,15mm ISO 7388 B / ISO7388B, CSN 220451-B DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4

    In stock
    6,26 € with VAT

  • Collet chuck ER32 with flange diameter 125mm(without collets)

    Collet chuck ER32 with flange diameter 125mm(without collets)

    Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Handle: up to 0,005mm Collets can be purchased separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

    In stock
    85,58 € with VAT

  • Hand tap M 4x0,5 No.1 HSS, MAS

    Hand tap M 4x0,5 No.1 HSS, MAS
    Clearance sale

    ČSN 22 3010 / CSN 223010 Metric hand tap M4 I Grade: 0,5, fine, ie 4x0,5 (M4x0,5) Material: HSS (high-speed steel )

    In stock
    3,36 € with VAT

  • Hand tap M 4x0,5 No.3 HSS, MAS

    Hand tap M 4x0,5 No.3 HSS, MAS
    Clearance sale

    ČSN 22 3010 / CSN 223010 Metric hand tap M4 III Grade: 0,5, fine, ie 4x0,5 (M4x0,5) Material: HSS (high-speed steel )

    On request
    3,36 € with VAT

  • Hand tap M 15x1,5 No.3 HSS, MAS

    Hand tap M 15x1,5 No.3 HSS, MAS
    Clearance sale

    ČSN 22 3010 / CSN 223010 Metric hand tap M15 III Gauge: 1,5, fine, ie 15x1,5 (M15x1,5) Material: HSS (high-speed steel )

    In stock
    3,85 € with VAT

  • Hand tap M 32x1,5 No.1 HSS ISO1, Narex

    Hand tap M 32x1,5 No.1 HSS ISO1, Narex

    Standard: ÄOSN 22 3010 / CSN 223010 Metric hand tap M32 I Pitch: 1,5, fine, ie 32x1,5( M32x1,5 ) Material: HSS(specified steel) Fitting: ISO1

    On request
    41,81 € with VAT

  • Hand tap M 32x1,5 No.3 HSS ISO1, Narex

    Hand tap M 32x1,5 No.3 HSS ISO1, Narex

    Standard: A „A’SN 22 3010 / CSN 223010 Metric hand tap M32 III Pitch: 1,5, fine, ie 32x1,5(M32x1,5) Material: HSS (high speed steel) Fitting: ISO1

    On request
    41,81 € with VAT

  • Hand tap M 33 HSS ISO1 - set, Narex

    Hand tap M 33 HSS ISO1 - set, Narex

    ČSN 22 3010 / CSN 223010 Metric hand tap M33 - Material: HSS (high speed cutting machine Steel) Face: ISO1

    In stock
    131,18 € with VAT

  • Hand tap M 33 No.1 HSS ISO1, Narex

    Hand tap M 33 No.1 HSS ISO1, Narex

    ČSN 22 3010 / CSN 223010 Metric hand tap M33 I Grade: 3,5, basic, ie 33x3,5 (M33x3,5) Material: HSS (high-speed steel ) Tolerance: ISO1

    In stock
    43,73 € with VAT

  • Hand tap M 33 No.2 HSS ISO1, Narex

    Hand tap M 33 No.2 HSS ISO1, Narex

    ČSN 22 3010 / CSN 223010 Metric hand tap M33 II Gradient: 3,5, basic, ie 33x3,5 (M33x3,5) Material: HSS (high-speed steel ) Tolerance: ISO1

    In stock
    43,73 € with VAT

Do you need advice?

Jakub Novák, Orders

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Taps