Taps

Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 20 Pitch: 20 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap( speed cutter 29 M 12 with chip breaker, straight groove Pitch: 1.75, basic Faceted ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: B, 4 turns - see attached photo Material : HSSE-PM( High speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiCN - Carbon-Nitride Titanium Use: Use: 4.2: Aluminum with silicon content: 1%

Machine tap (quick-cutting) M 3.5, straight groove Slope: 0.6, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: C, 2 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Grounded thread profile Usage: Brass with a long chip Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Left machine tap( speed cutter) M 12 with breaker for chisels, straight groove Climbs nA: 1,75, basic Fitting: ISO3 / 6G - grinding profile thread Standard: DIN 376 Thread thread: B, 4 courses - see attached photo Material: HSSE( High speed steel 5% Cobalt) Grinding profile thread Application: < br> Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Automatic steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum aluminum containing Si

Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%

Machine spiral tap ( high-speed ) UN 11/16x20, R40 SE 800 Size: UN 11/16 x 20 Pitch: 20 steps per inch Fit: 2B, ground thread profile Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Helix angle: 40° Usage: Structural and carbon steel, low alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Machine Spiral Tap( Quick Cut) UNS 1.1 / 16 ", R40 SE 800 Size: UNS 1-1 / 16" Ascent: 14 walk to inch Standard: DIN 374 C Run thread: C, 2 courses - see enclosed photo Material: HSSE( High speed steel 5% Cobalt) Coating: without coating angle helix: 40 Â ° < br> Usage: Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Free-cutting steel, construction and cementing steel Spherical and malleable cast iron Non-alloy and low-alloyed alloys copper Alloys aluminum containing Si

Machine spiral tap M12, R15 1400 PMS IK TiCN with cooling hole Dimensions: M12x1,75 Gradient: 1,75, basic Tire: ISO2 / 6HX - Cut profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, Slicing) TiCN (Titan Carbon -Nitrid) Cutting Thread Profile Cooling Emulsion / Fluid Hole Helix Angle: 15 ° Number of Blades: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps

Machine spiral tap M16, R15 1400 PMS IK TiCN with cooling hole Dimension: M16x2,0 Gradient: 2,0, Basic Tire: ISO2 / 6HX - Cut profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, Slicing) TiCN (Titan Carbon -Nitrid) Cutting thread profile for coolant emulsion / liquid Helix angle: 15 ° Number of edges: 4 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps

Machine spiral tap for NC / CNC machines (high speed) M 10 in helix 10x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Z362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10

Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 1/4 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes