Taps

M10x1.5 Moulder Thread with Lubrication Groove Form: C (2 Beads) ISO 2, 6HX Material: HSSE-PM (5% Cobalt Co5 , production by sintering) Coating: TiN DIN 371, DIN 2174, ČSN 22 3052 Application: 1.1: Soft steel and magnetic steel up to 400N / mm2 1.2: Cutting, structural and cementitious steels up to 500N / mm2 2.2: Austenitic corrosion-resistant steel up to 850N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 6.3: Brass with long chipping up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloy containing Si

Machine tap ( quick-cutting ) M 6x1.25 without chip breaker Diameter: 6mm Pitch: 1.25, fine Fit: ISO2 - ground thread profile Standard: DIN 371 Material: HSSE ( High speed steel 5%Cobalt )

Machine tap with straight groove whitworth BSW 21.8 x 1/14, custom production Pitch: 14 feet per inch, basic(W21,8x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves

Machine tap with straight groove whitworth BSW 24,32 x 1/14, custom production Pitch: 14 feet per inch, basic(W24,32x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves

Machine tap, straight groove, BSCy cyclo thread Size: 1/2" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap, straight groove, BSCy cyclo thread Size: 5/8" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap, straight groove, BSCy cyclo thread Size: 9/16" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap, straight groove, BSCy cyclo thread Size: 9/32" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine tap ( high-speed ) BSF 1-1/8", straight slot, custom made Pitch: 9 turns per inch, fine Standard: DIN 371 Thread start: B, 4 courses - see attached photo Material: HSS Grounded thread profile Usage: Unalloyed steel with strength up to 800N/ mm2 Brass with a long chip Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 1-5/16" x 12 Pitch: 12 pitches per inch Fit: 2B Form: B Material: HSSE - High Speed ??Steel Usage: Well machinable materials up to 600 N/mm2 Unalloyed and low alloy steels For through holes

Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 13/16" x 16 Pitch: 16 pitches per inch Fit: 2B Form: B Material : HSS - High Speed ??Steel Usage : Well machinable materials up to 600 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 16 Pitch: 16 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes