Taps

Hand orchard left tap M 12x1,0 - LH No. 1 - before cutting Pitch: 1,0, fine, ie M12x1,0 Material: HSS - High speed steel Fitting: ISO2 / 6H - ground thread profile Standard: ISO529

Machine tap M 6,5x0,75 - No.3 - Cutting Grade: 0,75, fine, ie M6,5x0,75 Material: HSS (high-speed steel)

Machine tap M 8x1.5 - set Pitch: 1.5, fine, i.e. M8x1.5 Tolerance: 6H Material: HSS(high-speed steel) Standard: DIN352

Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2

Abrasive stone for roller hammer 58-168mm Abrasive stone size: 11x100mm The set contains three abrasive stones. Suitable for head BS 101157 Grain: 220

Brand short bit - hexagon side: 10 mm RM-RIBE head has size: 11 mm Suitable for use with 10mm ratchet wrench or adapter for 3/8 "and 1/2" GOLA head < br> Material: Cr-V, ie Chrome-Vanadium High quality steel S2 Load capacity: up to 5kg Usage: VAG cylinder head screws on gasoline engines Fiat, Thema, Ducato, Tipo, Tempra, Bravo, Brava, Lancia Kappa, Dedra, Alfa Romeo, Audi, VW, Subaru, Seat, Fiat, Skoda, Lancia

Brand Long Bit - Hexagon Side: 10mm RM-RIBE Head is Size: 11mm Suitable for use with 10mm Ratchet Wrench or Adapter for 3/8 "and 1/2" GOLA Heads < br> Material: Cr-V, ie Chrome-Vanadium High quality steel S2 Load capacity: up to 5kg Usage: VAG cylinder head screws on gasoline engines Fiat, Thema, Ducato, Tipo, Tempra, Bravo, Brava, Lancia Kappa, Dedra, Alfa Romeo, Audi, VW, Subaru, Seat, Fiat, Škoda, Lancia

Machine Tap( Speed ??Cutter 29 M 4, Straight Slot 4x0.7 PMS Pitch: 0.7, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine Tap( Speed ??Cutter 29 M 6, Straight Slot 6x1.0 PMS Pitch: 1.0, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine Tap( Speed ??Cutter 29 M 10, Straight Slot 10x1.5 PMS Pitch: 1.5, Basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2-3 strokes - see attached photo Material: HSSE -PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color marking: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steels up to 44 HRC 3.1: Gray Cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass( copper-zinc steel with short weight) 4.9: Alloys of copper di with short hair

Machine spiral tap M8, R15 1400 PMS IK TiCN with cooling opening Size: M8x1,25 Gradient: 1,25, basic Tire: ISO2 / 6HX - Grinding profile DIN 371 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, -Nitrid) Cutting Thread Profile Cooling Emulsion / Fluid Hole Helix Angle: 15 ° Number of Blades: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps

Machine spiral tap M10, R15 1400 PMS IK TiCN with cooling hole Dimension: M10x1,5 Gauge: 1,5, basic Facing: ISO2 / 6HX - Grinding profile DIN 371 C Thread start: C, 2 steps - see attached photo Material: HSSE-PM (5% Cobalt Rapid Steel, -Nitrid) Cutting Thread Profile Cooling Emulsion / Fluid Hole Helix Angle: 15 ° Number of Blades: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Refractory corrosion-resistant steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR quality taps match the Czech N @ rex taps