Taps

Hand-held disposable nut tap Size and incline: according to the selected variant Fitting: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: - see attached catalog sheet

Right machine tap, straight slot with chip breaker, for metric thread - with hexagon for cordless drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : B Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Right machine tap with spiral groove, for metric thread - with hexagon for battery drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : C Helix angle: 15° Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For blind holes

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

Hexagon nut with collar Thread: M20 Hexagon Hardness: 34HRC Standard: no norm, resp. in replacement for ČSN 243530.2 or DIN 6331 Production technology: Pressing Total Nut Nut: 26mm Hexagon: 32mm

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 - set, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 I, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M3,5 II, ie 3,5x0,6 (M3,5x0,6) Gradient: 0,6, basic Facing: 2N Material: NO - Tool Steel Taps from NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M 3,5x0,35 I (M3,5x0,35) Gradient: 0,35, fine Tracing: 2N Material: NO - Tool Steel - Taps made of NO are suitable for threading or thread cutting.

ČSN 22 3010 / CSN 223010 Metric hand tap M 3,5x0,35 III (M3,5x0,35) Gradient: 0,35, fine Toggle: 2N Material: NO - Tool Steel - Taps made of NO are suitable for threading or thread cutting.

Hand Tap W 5/8 "- Third of the Set Material: NO - Tool Steel PN 8/3011 Taps from NO are suitable for threading or thread cutting.

Armor tap P29 (Pz29 / PG29) set Other armor tongs marking: Pz, PG Climbing: 16 turns per inch, basic Face: A Material: NO - Tool Steel Norm: PN 8/3014 DIN taps are suitable for threading or thread cutting.