Taps

Extra long machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Carbide machine tap (high speed) M straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: VHM - (VollHartMetall) - carbide Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Carbide machine tap (high speed), straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: solid carbide Version with internal cooling Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Left machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Set tap made of sintered steel HSSE-PM There are 3 taps in the set for the basic pitch. For fine pitch, there are 2 taps in the set. The pre-cutting tap has an insert with a drill diameter under the thread Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 352/3-P Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Machine spiral tap (high speed) R15 SE 800 Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15 ° Usage: 4.2: Aluminum with silicon content: 1%

Machine spiral tap (high speed) R15 1400 PMS IK TiCN with cooling hole Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN (Titanium Carbon-Nitride) Ground thread profile + hole for cooling emulsion / liquid Helix angle: 15 ° Number of edges: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC up to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Heat-resistant stainless steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR taps correspond in quality to Czech N@rex taps

Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Extra long machine tap (high speed) with spiral groove / in helix Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: no coating Standard: DIN 371, DIN 376 Form: C (lead length 2 to 3 threads) Helix: 40 ° Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine spiral tap (high speed), R45 SE 800 Fitting: ISO2 / 6H - ground thread profile Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 45 ° Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys

Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting

Metric hand tap M - set There are 3 taps in the set for the basic climb. There are 2 taps in a set for a gentle climb. Material: HSSE - high speed cobalt steel Povak: OX - oxidation Fitting: ISO2 / 6H Standard: DIN352 (replacement ČSN 22 3010 / CSN 223010) Usage: Structural, medium-alloy tool and heat-treated steels with strength up to 1100 MPa Stainless and heat-resistant steels up to 900 MPa Free-cutting, structural and heat-treated steels with a strength of up to 800 MPa Mild structural steels up to 500 MPa Gray, ductile and malleable cast iron Alloyed aluminum and copper alloys