Taps

Machine spiral tap (quick-cutting) UNF, R40 SE 800 Thread type: UNF - fine American unified inch thread (UNified thread Fine) Fitting: 2B, ground thread profile Standard: DIN 371 / DIN 374, ANSI B-1.1 Thread start: C, 2-3 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Coating: without coating Top thread angle: 60° Helix angle: 40° Usage: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Machine tap UNC spiral 800X Thread type: UNC (UNified thread Coarse) - American inch unified thread coarse Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

Machine tap UNF spiral 800X Type of thread: UNF (UNified thread Fine) - American inch unified thread fine Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

Machine metric tap with spiral groove, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread start: C, 2 courses - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine UNF spiral tap (high speed) R45 PM in helix Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45 ° Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, or even for older types of numerical and conventional machines with lower power.

Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNF (UNified thread Fine) - American inch unified fine thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN374 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Machine tap with spiral groove, made of sintered steel Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

Left machine spiral tap (high speed) R40 SE 800 Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 40 ° Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Left machine tap with spiral groove 800X Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371, DIN374, DIN376 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN Helix angle: 40 ° Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)

Machine metric tap with spiral groove, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread pitch: E, i.e. 1.5-2 turns - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine tap, straight groove with chip breaker, for American unified thread Thread type: UN - American unified thread (UNified thread) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Top thread angle: 60 ° Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes