Taps
-
Machine tap M12x1,5 HSS ISO1 C without chip breaker, extended, Narex
Clearance saleExtensible M 12x1.5 Machine Saw Without Chip Breaker Overall Length: 118mm Straight Groove, Cut Thread Profile Gradient: 1.5, Fine Facing: ISO1 Form: C (lenght of the flow - see enclosed photo) CSN 22 3042, extended series ČSN 223020 Material: HSS - High-speed steel
In stock9,56 € with VAT -
Machine tap M14 HSSE ISO3 B without chip breaker, Narex
Clearance saleMachine tap M 14 without chip breaker 14x2,0 Straight groove, ground thread profile Gradient: 2,0, basic Facing: ISO3 Form: B (run length - < respectively. before zinc - the thread cut out by this tap is looser
In stock9,56 € with VAT -
Machine tap M14 HSSE ISO2 B without chip breaker, extended, Narex
Clearance saleExtensible machine tap M 14 without chip breaker 14x2,0 Overall length: 110mm Straight groove, cut thread profile Gradient: 2,0, basic Facing: ISO2 < br> Form: B (lenght of the run - see enclosed photo) CSN 22 3042 (DIN 376), extended series ČSN 223020 Material: HSSE - High-speed steel 5% Co
In stock11,75 € with VAT -
Machine tap M16x1,5 HSSE ISO1 C without chip breaker, Narex
Clearance saleHome Machine tap (high speed) M 16x1.5 without chip breakers Home straight groove cut thread profile Home Pitch: 1.5, fine Home Fit: ISO1 Home Form B (length of attack - see attached photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request15,38 € with VAT -
Machine tap M18 HSSE ISO2 C without chip breaker, Narex
Clearance saleMachine tap M 18 without chip breaker 18x2,5 Overall length: 125mm Straight groove, cut thread profile Gradient: 2,5, basic Face: ISO2 Form: C (lenght of run - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
In stock19,11 € with VAT -
Machine tap M18x1,5 HSSE ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 18x1,5 without chip breaker Straight groove, cut thread profile Gradient: 1,5, fine Facing: ISO1 Form: C (lenght of run - see attached photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request15,38 € with VAT -
Machine tap M20x1,5 HSSE ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 20x1,5 without chamfer, series 7850 Straight groove, ground thread profile Gradient: 1,5, fine Facing: ISO1 Form: C ( length of run - see enclosed photo) CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request19,07 € with VAT -
Machine tap M22 HSSE ISO1 C without chip breaker, Narex
Clearance saleMachine tap M 22 without chip breaker 22x2,5 Straight groove, cut thread profile Gradient: 2,5, basic Facing: ISO1 Form: C (run length - see enclosed photo) Standard: CSN 22 3042 Material: HSSE - High-speed steel 5% Co
On request20,06 € with VAT
