Taps

Machine tap( high-speed cutter 29 M 12, straight groove with chip breaker 12x1.75 PM 1400 TC Pitch: 1.75, set Positive Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 Thread start: B, 4-5 gauges - see application © photo Material: HSSE-PM( High-speed steel 5% Cobalt, sintering production) Grinding thread profile Color coding: without marking Coating: TiAlSiN Application: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of hardened and hardened steels up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass(-copper-zinc steel with short cut ) 4.9: Copper alloys with short hair

Machine spiral tap ( quick cutting ) M 14 R15 PM TS 1400-HT in helix 14x1.0 Pitch: 1.0, fine Fit: ISO2 / 6HX - ground thread profile Standard : DIN 374 Thread lead : C , 2 courses - see attached photo Material : HSSE-PM ( High-speed steel 5% Cobalt , production by sintering ) Grounded thread profile Coating : TiAlSiN Helix angle : 15° Use : 1.5 : Hardened and hardened steels up to 38 HRC up to 1400N/mm2 1.6 : Steel alloys and hardened steels up to 44 HRC 3.1 : Gray cast iron 3.3 : Nodular and malleable cast iron up to 700N/mm2 4.6 : Brass (copper-zinc steel with short chip) 4.9 : Copper alloys with short chip

Machine spiral tap for NC / CNC machines (high speed) M 10 in helix 10x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 12 in helix 12x1,75 S-NC Gradient: 1,75, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steel, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: up to 400M / mm2 1.2: Construction and automation steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon with up to 5% silicon content up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 14 in helix 14x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 16 in helix 16x2,0 S-NC Gradient: 2,0, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap(high speed) M 10 R45 PM in helix 10x1,5 Pitch: 1,5, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 376 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting of thread into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutter 29 M 12 R45 PM in helix 12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steel, stainless steel, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency for cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap(high speed) M 12x1,5 R45 PM in helix Pitch: 1,5, fine Fitting: ISO2 / 6H - grinder Thread profile Standard: DIN 374 Thread start: C, 2 strokes - see attached photo Material: HSSE-PM(High speed cutting) Â!Steel 5 coating, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can also be used in emergencies for piece cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap(high speed) G3 / 8 "R45 PM in helix Size: 3/8" Pitch: 19 walking per inch Thread start: C, 2 courses - see attached photo Material: HSSE-PM(High speed steel 5 wrap, forging) Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with a hardness of 2600 HV helix angle: 45 Â ° Standard: DIN5156, DIN ISO228 Grinding profile thread Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat- resistant steels, can also be used in an emergency on a piece cut It turns into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap for NC / CNC machines (high speed) G 1/8 "in S-NC helix Angle: 28 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) G 1/4 "in S-NC helix Angle: 19 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting