Taps
-
Machine tap UNF 3/8 "x 24, 2B DIN371 with chip breaker HSSE, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UNF 3/8 "x 24 Gradient: 24 strokes per inch Form: B Material: HSSE Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels For through holes
In stock17,01 € with VAT -
Machine tap UNF No. 10 x 32, 2B DIN371 spiral HSSE, VOLKEL
Machine spiral spiral, American unified whitworth thread fine Size: UNF size 10 x 32 (corresponds to 4,826mm) Gradient: 32 turns per inch Form: C Helmets: 35 Material: HSSE - Rapid Steel 5% Co5 Cobalt Standard: ANSI B 1.1, DIN371 Usage: Highly workable materials up to 900 N / mm2 Non-alloy and low alloy steels For blind holes
On request18,14 € with VAT -
Machine tap UNF 1/2 "x 20, 2B DIN376 with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UNF 1/2 "x 20 Gradient: 20 strokes per inch Form: B Material: HSSE Application: Highly workable materials up to 900 N / mm2 Non-alloy and low alloy steels For through holes
In stock20,27 € with VAT -
Machine tap M20 HSS-G ISO2 B ISO529 with chip breaker, VOLKEL
Right machine tap, straight slot with chip breaker, for metric thread Size: M20 x 2.5 / 20x2.5 Pitch: 2.5 Form: B Material: HSS - High-speed steel Standard: ISO529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock30,23 € with VAT -
Machine tap M20 HSS-G ISO2 C ISO529 spiral, VOLKEL
Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock36,94 € with VAT -
Machine tap UNS 1/2 - 24 HSS LH left, CZTOOL
Machine Tap, Straight Slot on US Unified inch Thread Size: UNS 1/2 "x 24 LH Angle: 24 Paths per inch Form: B Material: HSS - Rapid Cut Steel Usage: Well-machined materials up to 600 N / mm2 Unalloyed and low alloy steels For through holes
On request111,80 € with VAT -
Machine tap UN 7/16 - 32, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UN 7/16 "x 32 Gradient: 32 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock17,91 € with VAT -
Machine tap UN 1/2 - 32, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UN 1/2 "x 32 Gradient: 32 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock17,91 € with VAT -
Machine tap UN 9/16 - 20, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UN 9/16 "x 20 Gradient: 20 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock26,86 € with VAT -
Machine tap UN 9/16 - 28, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UN 9/16 "x 28 Gradient: 28 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock26,86 € with VAT -
Machine tap UN 5/8 - 20, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on US unified whitworth thread Size: UN 5/8 "x 20 Angle: 20 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Well-machined materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock29,11 € with VAT -
Machine tap UN 5/8 - 28, ISO529 2B with HSSE breaker, VOLKEL
Machine tap, straight groove with chamfer, on American unified whitworth thread Size: UN 5/8 "x 28 Creep: 28 strokes per inch Form: B Material: HSSE - High Speed ??Steel 5% Co5 Cobalt Standard: ISO529 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel Pro through holes
In stock29,11 € with VAT
