Taps

Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Manual disposable M6 nut tap Pitch: 1.0, basic Fit: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: l1 - 110mm l2 ??- 32mm d2 - 4.5mm a - 3.5mm

Manual disposable M12 nut tap Pitch: 1.75, basic Fit: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: l1 - 180mm l2 ??- 50mm d2 - 9.0mm a - 7.0mm

Drill stand - drill bit Drills 1,0 - 10,0mm, total 121 drills Drills: 1,0 to 3,0 po 0, 05mm Individual diameters are embossed Size: 220x160x36mm

NPT short machine tap, straight groove, for conical pipe thread Size: 3/8" Pitch: 18 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

NPT short machine tap, straight groove, for conical pipe thread Size: 1/2" Pitch: 14 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

NPT short machine tap, straight groove, for conical pipe thread Size: 3/4" Pitch: 14 turns per inch Taper: 1:16 Peak angle: 60° Form: C Material: HSS - High Speed ??Steel Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through holes

Short machine tap BSP 1/8" for pipe thread Pitch: 28 steps per inch, basic Standard: DIN 5157 Material: HSS-G - High speed steel Dimensions - see attached photo

Short machine tap BSP 1/4" for pipe thread Pitch: 19 steps per inch, basic Standard: DIN 5157 Material: HSS-G - High speed steel Dimensions - see attached photo

Set of 5 threaded bits Bits in the set: M3 , M4 , M5, M6 , M8 , M10 Pitch: basic Material: HSS - High speed steel Tolerance ISO2/6H Form D Usage: Thread cutting in AKU drill, also suitable for quick repair ( stretching ) of threads

Threaded Bit M 3 into 1/4 "Hex Shank Drill ISO2 Material: HSS - High Speed ??Steel Usage: Thread cutting in the drill string, also suitable for quick repair (stretching) of threads