Taps

Set of quality taps and socks of Czech production AUTO-1 Set of die-cut tools Range: M7-M24x1,5 Kit contains: Taps and loops: M7, M11 Taps and tapes eyelets: M8x1,0, M10x1,0, M10x1,25, M11x1,0, M12x1,0, M12x1,25, M12x1,5, M14x1,0, M14x1,25, M14x1,5, M16x1,0, M16x1,0 left , M16x1,5, M18x1,5, M20x1,5, M22x1,5, M24x1,5 Taps for screwdrivers: 5mm, 5,6mm, 6,3mm, 7,1mm, 9mm Set with stitch thread sizes and taps for passenger car repair Material: NO - tool steel

Extra long machine tap( high-speed cutter 29 M 6 with chip breaker, straight groove Pitch: 1,0, basic Fitting: ISO2 - ground thread profile Standard: DIN 376 * Form: B(-stroke length 3 to 4 threads) Material l: HSSE( High speed steel 5% Cobalt) Ord. Number: 32073

Extra long machine tap( high-speed cutter 29 M 8 with chip breaker, straight groove Pitch: 1,25, basic Fitting: ISO2 - ground thread profile Standard: DIN 376 * Form: B(-stroke length 3 to 4 threads) Material l: HSSE( High speed steel 5% Cobalt) Ord. Number: 32074

Extra long machine tap( speed cutter 29 M 10 with chip breaker, straight groove Pitch: 1,5, basic Fitting: ISO2 - ground thread profile Standard: DIN 376 * Form: B(-stroke length 3 to 4 threads) Material l: HSSE( High speed steel 5% Cobalt) Ord. Number: 32075

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 18mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm Also in the Z axis , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

M1-II LH M3-M12 M3-M12 M3-M12 M3-M12 M3-M12 M3-M12, M12 Contains Taps for Taps No. 2, Clamping Range (Square) 2,5-7,1mm Includes Eyelet Latch: 38mm Plastic Insert 30mm Material: HSS - High Speed ??Steel

M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel

Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815

Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.

Set of machine taps with HSSE chip breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 ( reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : uncoated Number of leading teeth : B (4-5 teeth) Drills : 2 .5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - through hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47835

M3, M4, M5, M6, M8, M10, M12 Tolerance: ISO2 / 6H Material: HSSE - Rapid Cutting Steel 5% Co5 = HSSCo5 Max. Thread depth: 2xD Usage: Unalloyed and alloyed steels up to 600N / mm2 Copper, brass, aluminum alloy, zinc alloy Suitable for speed- for drilling and threading. Not suitable for tapping adapters.

Set of machine taps with spiral groove / set of HSSE spiral taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : without coating Number of leading teeth : C (2-3 teeth) Drills: 2.5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47847